DiClad 870 2-Layer 93mil PCB – High-Frequency, Low-Loss, Immersion Gold Finish for RF Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers DiClad 870 laminates are woven fiberglass reinforced, PTFE-based composites designed for use as high-performance printed circuit board substrates. By utilizing fewer plies of woven fiberglass and a higher ratio of PTFE content, DiClad 870 offers a lower dielectric constant (Dk) and dissipation factor compared to other laminates in the DiClad series, making it ideal for high-frequency and low-loss applications.
Dielectric Constant (Dk): 2.33 at 10 GHz and 1 MHz, 50% RH Dissipation Factor: 0.0013 at 10 GHz, 0.0009 at 1 MHz, 50% RH Thermal Coefficient of Dk (TcDK): -161 ppm/°C from -10°C to 140°C at 10 GHz Arc Resistance: >180 seconds Moisture Absorption: 0.02% CTE: X-axis: 17 ppm/°C, Y-axis: 29 ppm/°C, Z-axis: 217 ppm/°C Copper Peel Strength: 14 lbs/in, 10s @288°C Flammability Rating: UL 94-V0
Lowest moisture absorption among PTFE-based composites Stable dielectric constant over a wide frequency range Low Dk supports wider line widths for reduced insertion loss
Copper_layer_1 - 35 μm DiClad 870 - 2.362 mm (93mil) Copper_layer_2 - 35 μm
Components: 11 Total Pads: 40 Thru Hole Pads: 24 Top SMT Pads: 16 Bottom SMT Pads: 0 Vias: 19 Nets: 2
Radar Feed Networks Commercial Phased Array Networks Low-Loss Base Station Antennas Guidance Systems Digital Radio Antennas Filters, Couplers, LNAs
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
