BICHENGPCBBicheng Technologies Limited

Rogers DiClad 527 2-Layer 0.6mm Immersion Gold PCB – Radar & Phased Array Systems

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

1. Introduction to Rogers DiClad 527 PCB

Rogers DiClad 527 laminates are woven fiberglass reinforced, PTFE-based composite materials for use as printed circuit board substrates. They offer a higher ratio of fiberglass reinforcement to PTFE content. This carefully controlled ratio provides a higher dielectric constant (Dk) range and better dimensional stability and registration. This 2-layer rigid PCB is constructed entirely with DiClad 527 as the core material, making it ideal for demanding microwave, radar, and phased array applications.

DiClad 527 laminates exhibit extremely low loss tangent, consistent mechanical performance, and stable electrical properties over a wide frequency range — critical for high-frequency, high-reliability applications. The material shows negligible performance drift caused by high humidity environments and excellent chemical resistance, making it suitable for both indoor and outdoor harsh environments.

2. Key Features of Rogers DiClad 527 PCB

Dk range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH

Dissipation factor of 0.0017 at 10 GHz, 0.0010 at 1MHz, 50% RH

TcDK of -153 ppm/°C ranging -10~140°C, 10 GHz

CTE in X-axis: 14 ppm/°C, Y-axis: 21 ppm/°C, Z-axis: 173 ppm/°C

Excellent dimensional stability and registration

Negligible performance drift caused by high humidity environments

Extremely Low Loss Tangent for high-frequency & high-power designs

Excellent Dimensional Stability ensuring multi-layer registration accuracy

Product Performance Uniformity and batch-to-batch consistency

Electrical Properties Highly Uniform Across Frequency

Consistent Mechanical Performance under thermal cycling

Excellent Chemical Resistance for aggressive fabrication environments

Stable Dk over wide frequency range ensures predictable impedance control

Low circuit losses at high frequency enhance system efficiency

Negligible performance drift caused by high humidity environments — ideal for outdoor and shipboard equipment

5. PCB Stackup (2-Layer Rigid Structure)

7. Rogers DiClad 527 Material – Product Introduction

Rogers DiClad 527 laminates are woven fiberglass reinforced, PTFE-based composite materials for use as printed circuit board substrates. They offer a higher ratio of fiberglass reinforcement to PTFE content. This carefully controlled ratio provides a higher dielectric constant (Dk) range and better dimensional stability and registration. The material is well known for extremely low loss tangent, consistent mechanical performance, and stable electrical properties over a wide frequency range — critical for high-frequency, high-reliability applications.

DiClad 527 exhibits negligible performance drift caused by high humidity environments and excellent chemical resistance, making it suitable for both indoor and outdoor harsh environments. The combination of low moisture absorption (0.03%) and stable Dk over temperature ensures reliable operation in aerospace, defense, and telecommunication infrastructure.

9. DiClad 527 Typical Properties (Data Sheet)

Type of artwork supplied: Gerber RS-274-X

12. Standard Thicknesses, Panel Sizes & Claddings

13. Dk Stability & Frequency Performance

DiClad 527 maintains a stable dielectric constant over a broad frequency range (1 MHz to 10 GHz) with minimal variation, ensuring predictable impedance control for high-frequency circuits. The typical Dk at 10 GHz is between 2.4 and 2.6, and the material shows exceptionally low sensitivity to humidity and temperature changes.

Application areas

  • Dk range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH
  • Dissipation factor of 0.0017 at 10 GHz, 0.0010 at 1MHz, 50% RH
  • TcDK of -153 ppm/°C ranging -10~140°C, 10 GHz
  • Low Moisture Absorption: 0.03%
  • CTE in X-axis: 14 ppm/°C, Y-axis: 21 ppm/°C, Z-axis: 173 ppm/°C
  • Excellent dimensional stability and registration
  • Stable Dk over wide frequency range
  • Low circuit losses at high frequency
  • Negligible performance drift caused by high humidity environments
  • Excellent chemical resistance
Rogers DiClad 527 2-Layer Immersion Gold PCB
DiClad 527 Material

PCB specifications

Base materialRogers DiClad 527 (woven fiberglass reinforced PTFE)
Layer count2-layer
Board dimensions49.63mm x 91.54mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.6mm (20 mil core)
Finished Cu weight1 oz (35 μm / 1.4 mils) outer layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Layer stack-up

  1. Copper_layer_1 (Top) · Copper · 35 μm (1 oz)copper
  2. Core · DiClad 527 · 0.508 mm (20 mil)core
  3. Copper_layer_2 (Bottom) · Copper · 35 μm (1 oz)copper

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com