BICHENGPCBBicheng Technologies Limited

RO4003C LoPro 2-Layer 20.7mil Silver-Gold PCB for High-Frequency Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RO4003C LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4003C dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining the other desirable attributes of the standard RO4003C laminate system. RO4003C hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes and do not require specialized via preparation such as sodium etch for lower manufacturing cost.

Stable Dielectric Constant: 3.38 ±0.05 at 10 GHz/23°C Low Loss Characteristics: Dissipation factor of 0.0027 at 10 GHz/23°C High Temperature Performance: Td > 425°C, High Tg greater than 280°C TMA Effective Thermal Management: High Thermal Conductivity of 0.64 W/mK Excellent Reliability: Low Z-axis coefficient of thermal expansion at 46 ppm/°C Dimensional Stability: Copper matched CTE X-axis 11 ppm/°C, Y-axis 14 ppm/°C (-55 to 288°C) Modern Manufacturing: Lead free Process Compatible

Enhanced High-Frequency Performance: Lower insertion loss allows for higher operating frequency designs (even greater than 40 GHz) Improved Signal Quality: Reduced passive inter-modulation (PIM) for base station antennas Superior Thermal Management: Improved thermal performance due to lower conductor loss Design Flexibility: Multilayer PCB capability and design flexibility Manufacturing Versatility: High temperature processing capability Environmental Compliance: Meets environmental concerns and CAF resistant

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm Rogers RO4003C LoPro Substrate - 20.7mil (0.526mm) Copper Layer 2 - 35 μm

Components: 12 Total Pads: 61 Thru Hole Pads: 29 Top SMT Pads: 32 Bottom SMT Pads: 0 Vias: 39 Nets: 2

Digital applications such as servers, routers, and high speed back planes Cellular base station antennas and power amplifiers LNB's for direct broadcast satellites RF Identification Tags

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RO4003C LoPro High-Frequency PCB

PCB specifications

Base MaterialRO4003C Low Profile
Layer Count2-Layer
Board Dimensions64mm × 68.4mm = 1PC
Minimum Trace/Space5/5 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.65mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishSilver underplating + Gold plating
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment
Design StandardIPC-Class-2
Artwork FormatGerber RS-274-X
AvailabilityWorldwide

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com