BICHENGPCBBicheng Technologies Limited

RO3010 2-Layer 25mil ENIG PCB for High-Dk RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.

High Dielectric Constant: 10.2 ±0.30 at 10 GHz/23°C Low Loss Performance: Dissipation factor of 0.0022 at 10 GHz/23°C Excellent Thermal Stability: CTE 13 ppm/°C (X), 11 ppm/°C (Y), 16 ppm/°C (Z) from -55 to 288°C High Temperature Resistance: Td > 500°C Effective Thermal Management: Thermal Conductivity of 0.95 W/mK Environmental Durability: Moisture Absorption of 0.05% Wide Operating Range: -40°C to +85°C operation

Dimensional Reliability: Material exhibits dimensional stability with expansion coefficient matched to copper Cost Efficiency: Economical laminate pricing for volume manufacturing process Quality Assurance: ISO 9001 Certified Design Versatility: Suitable for use with multi-layer board designs

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm Rogers RO3010 Substrate - 25mil (0.635mm) Copper Layer 2 - 35 μm

Components: 11Total Pads: 31Thru Hole Pads: 21Top SMT Pads: 10Bottom SMT Pads: 0Vias: 12Nets: 2

Automotive radar applications Global positioning satellite antennas Cellular telecommunications systems - power amplifiers and antennas Patch antenna for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

RO3010 PCB

PCB specifications

Base MaterialRO3010
Layer Count2-layer
Board Dimensions45mm × 65mm = 1PC
Minimum Trace/Space4/4 mils
Minimum Hole Size0.3mm
Finished Board Thickness0.8mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com