BICHENGPCBBicheng Technologies Limited

RO3010 2-Layer 0.127mm PCB – High-Dk Ceramic-Filled PTFE Substrate with ENIG for RF & Automotive Radar

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.

Dielectric constant of 10.2 ± 0.30 at 10 GHz / 23°C Dissipation factor of 0.0022 at 10 GHz / 23°C Low Coefficient of Thermal Expansion (-55 to 288°C): X: 13 ppm/°C, Y: 11 ppm/°C, Z: 16 ppm/°C Thermal decomposition temperature Td > 500°C Thermal Conductivity: 0.95 W/mK Moisture Absorption: 0.05% Operating Temperature Range: -40°C to +85°C

Material exhibits dimensional stability with expansion coefficient matched to copper Economical laminate pricing for volume manufacturing process ISO 9001 Certified Suitable for use with multi-layer board designs

Copper_layer_1 - 35 μm Rogers RO3010 - 0.127 mm (5mil) Copper_layer_2 - 35 μm

Components: 1 Total Pads: 4 Thru Hole Pads: 2 Top SMT Pads: 2 Bottom SMT Pads: 0 Vias: 4 Nets: 2

Automotive radar applications Global positioning satellite antennas Cellular telecommunications systems – power amplifiers and antennas Patch antenna for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes

Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide

RO3010 PCB

PCB specifications

Base MaterialRO3010
Layer Count2-layer
Board Dimensions49mm × 27mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.2mm
Finished Board Thickness0.2mm
Finished Cu Weight1 oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishENIG
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com