RO3006 PCB 2-Layer 5mil: High-Frequency Ceramic-Filled PTFE Laminates for Automotive Radar and Wireless Communication Systems
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO3006 laminates are ceramic-filled PTFE composites engineered to deliver outstanding electrical and mechanical stability for commercial microwave and RF applications. These advanced circuit materials maintain a consistent dielectric constant (Dk) across a wide temperature range, effectively eliminating the step change in Dk commonly seen with PTFE glass materials near room temperature.
Rogers RO3006 ceramic-filled PTFE composites Dielectric constant of 6.15 ± 0.15 at 10 GHz/23°C Dissipation factor of 0.002 at 10 GHz/23°C Thermal degradation temperature greater than 500°C Thermal conductivity of 0.79 W/mK Moisture absorption of 0.02% Coefficient of thermal expansion (from -55 to 288 °C): X axis 17 ppm/°C, Y axis 17 ppm/°C, Z axis 24 ppm/°C
Uniform mechanical properties across various dielectric constants, making it ideal for multi-layer board designs and compatible with epoxy glass multi-layer board hybrid constructions. Low in-plane expansion coefficient that matches copper, ensuring reliable surface-mounted assemblies and excellent dimensional stability, particularly in temperature-sensitive applications. Economical laminate pricing due to a volume manufacturing process.
4.PCB Stackup: 2-layer rigid PCB Copper layer 1 - 35 µm Rogers RO3006 - 5 mil (0.127 mm) Copper layer 2 - 35 µm
Board dimensions: 51.51 mm x 25.5 mm = 1 piece Minimum trace/space: 4/6 mils Minimum hole size: 0.3 mm No blind vias. Finished board thickness: 0.25 mm Finished copper weight: 1 oz (1.4 mils) for outer layers Via plating thickness: 20 µm Surface finish: Immersion silver Top silkscreen: None Bottom silkscreen: None Top solder mask: None Bottom solder mask: None 100% electrical testing conducted prior to shipment
6.PCB Statistics Components: 9 Total pads: 23 Through-hole pads: 11 Top SMT pads: 12 Bottom SMT pads: 0 Vias: 19 Nets: 2
7. Type of Artwork SuppliedGerber RS-274-X
Automotive radar applications Global positioning satellite antennas Cellular telecommunications systems, including power amplifiers and antennas Patch antennas for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
