BICHENGPCBBicheng Technologies Limited

RO3006 2-Layer 0.2mm PCB – 5mil Ultra-Thin Ceramic PTFE with Pure Gold Plating for RF & Bonding

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1. Introduction to RO3006 2-Layer 0.2mm PCB

Rogers RO3006 laminates are ceramic-filled PTFE composites engineered to deliver exceptional electrical and mechanical stability for commercial microwave and RF applications. These advanced circuit materials maintain a stable dielectric constant (Dk) across temperature variations, effectively eliminating the step change in Dk that typically occurs with PTFE glass materials near room temperature. This superior stability makes RO3006 ideal for precision high-frequency applications where consistent performance is critical.

Rogers RO3006 ceramic-filled PTFE composite material Dielectric constant: 6.15 ± 0.15 at 10 GHz/23°C Dissipation factor: 0.002 at 10 GHz/23°C Thermal decomposition temperature: >500°C Enhanced thermal conductivity: 0.79 W/m·k Low moisture absorption: 0.02% Coefficient of Thermal Expansion (-55 to 288°C): X-axis 17 ppm/°C, Y-axis 17 ppm/°C, Z-axis 24 ppm/°C

Uniform mechanical properties across dielectric constant range Ideal for multi-layer board designs with varying dielectric constants Compatible with epoxy glass multi-layer board hybrid designs Low in-plane expansion coefficient matched to copper Enables reliable surface mounted assemblies Excellent dimensional stability for temperature-sensitive applications Volume manufacturing process for cost-effective production

5. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μm Rogers RO3006 - 5mil (0.127mm) Copper_layer_2 - 35 μm

Components: 3Total Pads: 14Thru Hole Pads: 10Top SMT Pads: 4Bottom SMT Pads: 0Vias: 16Nets: 2

Automotive radar systems Global positioning satellite antennas Cellular telecommunications systems (power amplifiers and antennas) Patch antennas for wireless communications Direct broadcast satellites Datalink on cable systems Remote meter readers Power backplanes

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

RO3006 PCB

PCB specifications

Base MaterialRO3006
Layer Count2 layers
Board Dimensions20mm × 25mm
Min. Trace/Space5 mil / 9 mil
Min. Hole Size0.2 mm
Blind ViasNo
Finished Board Thickness0.2 mm
Finished Cu Weight1 oz (outer layers)
Via Plating Thickness20 μm
Surface FinishPure Gold (30 µ", for wire bonding)
Top/Bottom SilkscreenNo
Top/Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com