BICHENGPCBBicheng Technologies Limited

F4BTM350 2-Layer 3.1mm Thick PCB for High-Frequency RF & Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Wangling's F4BTM350 laminates are engineered through a scientific formulation of fiberglass cloth, nano-ceramic fillers, and polytetrafluoroethylene resin, followed by stringent pressing processes. This series builds upon the F4BM dielectric layer by incorporating high-dielectric, low-loss nano-ceramic materials. The result is a laminate with a higher dielectric constant, improved heat resistance, a lower thermal expansion coefficient, higher insulation resistance, and enhanced thermal conductivity—all while maintaining excellent low-loss characteristics.

F4BTM350 and F4BTME350 share the same dielectric layer but differ in copper foil type: F4BTM uses ED copper foil and is suitable for applications without PIM (Passive Intermodulation) requirements, while F4BTME uses reverse-treated (RTF) copper foil, offering superior PIM performance, more precise line control, and reduced conductor loss.

Dielectric constant (Dk) of 3.5 ±0.07 at 10GHz Dissipation factor of 0.0025 at 10GHz CTE: x-axis 10 ppm/°C, y-axis 12 ppm/°C, z-axis 51 ppm/°C (-55°C to 288°C) Low thermal coefficient of Dk: -60 ppm/°C (-55°C to 150°C) Moisture absorption ≤ 0.05% Flammability rating: UL-94 V0 CTI > 600V, Grade 0

3.Benefits of Using F4BTM350 in PCB Design

Excellent high-frequency performance with stable Dk and low loss Enhanced thermal and mechanical reliability Suitable for precision RF and microwave circuits Compatible with immersion gold surface finish for improved solderability and shelf life Supports fine trace/spacing down to 5/7 mils for high-density designs

Copper layer 1: 35µm F4BTM350 core: 3.048mm (120mil) Copper layer 2: 35µm

Components: 58 Total pads: 139 Through-hole pads: 97 Top SMT pads: 42 Bottom SMT pads: 0 Vias: 68 Nets: 2

Microwave, RF, and radar systems Phase shifters Power dividers, couplers, combiners Feed networks Phase-sensitive antennas, phased array antennas Satellite communications Base station antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BTM350 PCB

PCB specifications

Base MaterialF4BTM350
Layer Count2-layer
Board Dimensions328mm x 84.08mm (±0.15mm)
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness3.1mm
Finished Cu Weight (Outer)1oz (1.4 mils)
Via Plating Thickness20µm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com