BICHENGPCBBicheng Technologies Limited

F4BTM300 2-Layer 10mil Ceramic-Filled PTFE PCB with ENIG Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

The F4BTM series laminates are manufactured through a meticulous process that involves the scientific formulation of glass fiber cloth, nano-ceramic fillers, and polytetrafluoroethylene (PTFE) resin.

These substrates are built upon the F4BM dielectric layer and incorporate high dielectric constant and low loss nano-ceramics. This integration results in enhanced dielectric constant, superior heat resistance, reduced thermal expansion coefficient, increased insulation resistance, and improved thermal conductivity, all while maintaining low loss characteristics.

Furthermore, F4BTM laminates are specifically paired with reverse-treated RTF copper foil, providing exceptional performance in terms of PIM, precise line control, and minimized conductor loss.

Dielectric constant (Dk) of 3 +/-0.06 at 10GHz Dissipation factor of 0.0018 at 10GHz, 0.0023 at 20GHz CTE x-axis of 15 ppm/°C, CTE y-axis of 16 ppm/°C, CTE z-axis of 72 ppm/°C, ranging -55°C to 288°C Low thermal coefficient of Dk at -75 ppm/°C, ranging -55°C to 150°C Moisture absorption of 0.05% UL-94V0

Enhanced dielectric constant and thermal performance with nano-ceramic fillers Improved heat resistance and reduced thermal expansion Higher insulation resistance and thermal conductivity Low loss characteristics maintained Excellent PIM performance with RTF copper foil Precise line control and reduced conductor loss

Copper layer 1 – 35 μm F4BTM300 Core – 0.254 mm (10mil) Copper layer 2 – 35 μm

Components: 29 Total Pads: 106 Thru Hole Pads: 73 Top SMT Pads: 33 Bottom SMT Pads: 0 Vias: 26 Nets: 2

Aerospace equipment, space and cabin equipment Microwave, RF Radar, military radar Feed networks Phase-sensitive antennas, phased array antennas Satellite communications, and more

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BTM300 PCB

PCB specifications

Base MaterialF4BTM300
Layer Count2 layers
Board Dimensions112mm × 89mm (±0.15mm)
Minimum Trace/Space4/5 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.3mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishENIG (Electroless Nickel Immersion Gold)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com