BICHENGPCBBicheng Technologies Limited

F4BM265 High-Frequency PCB with 6.2mm Thick Core for RF/Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1.Product Introduction: Advanced PTFE Composite Material

The F4BM265 laminate represents a significant advancement in high-frequency circuit materials, combining fiberglass cloth, PTFE resin, and PTFE film through a scientifically formulated pressing process. This improved version of F4B offers superior electrical performance with a wider range of dielectric constants, lower loss, higher insulation resistance, and enhanced stability. The material comes in two variants: F4BM with standard ED copper for general applications, and F4BME with reverse-treated foil (RTF) copper for superior PIM performance and conductor loss reduction.

Precision Dielectric Constant: 2.65±0.05 @10GHz Low Signal Loss: 0.0013 dissipation factor @10GHz Temperature Stability: -100 ppm/°C ΔDk (-55°C to 150°C) CTE Characteristics: 14/17/142 ppm/°C (X/Y/Z axes) Thermal Conductivity: 0.36 W/mK Moisture Resistance: 0.08% absorption

F4BM265 Core - 3.0 mm (118mil) Copper layer 2 - 35 μm ---------------Bonding ply -------------- F4BM265 Core - 3.0 mm (118mil) Copper layer 3 - 35 μm

Components: 49 Total Pads: 177 Thru Hole Pads: 79 Top SMT Pads: 98 Bottom SMT Pads: 0 Vias: 164 Nets: 6

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Optimized PTFE Formulation: Improved over standard F4B materials Dimensional Stability: Tight CTE control for reliable plated through-holes Design Flexibility: Available with ED or RTF copper options High-Frequency Performance: Stable electrical properties up to 20GHz

Microwave, RF, and radar systems Phase shifters, passive components Power dividers, couplers, combiners Feed networks, phased array antennas Satellite communications Base station antennas.

PCB specifications

Base MaterialF4BM265 PTFE Composite
Layer Count3-Layer
Board Dimensions168mm × 168mm (±0.15mm)
Minimum Trace/Space6/8 mils
Minimum Hole Size0.4mm
Via TypeThrough-Hole Only
Finished Thickness6.2mm
Copper Weight1oz (35μm) all layers
Via Plating Thickness20μm
Surface FinishBare Copper
Silkscreen (Top/Bottom)None / None
Solder Mask (Top/Bottom)None / None
Electrical Testing100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com