BICHENGPCBBicheng Technologies Limited

F4BM217 2-Layer 3.9mil Ultra-Thin PTFE PCB with Immersion Gold

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Wangling's F4BM217 laminates are made by scientifically formulating and strictly pressing a combination of fiberglass cloth, polytetrafluoroethylene resin, and polytetrafluoroethylene film. Its electrical performance is improved compared to F4B220, mainly due to lower dielectric loss, increased insulation resistance, and improved stability. It can replace similar foreign products.

F4BM217 and F4BME217 have the same dielectric layer but different copper foil combinations: F4BM217 is paired with ED copper foil, suitable for applications without PIM requirements; F4BME217 is paired with reverse-treated foil (RTF) copper foil, offering excellent PIM performance, more precise line control, and lower conductor loss.

By adjusting the ratio between polytetrafluoroethylene and fiberglass cloth, F4BM217 and F4BME217 achieve precise control of the dielectric constant, providing low loss and enhanced dimensional stability. A higher dielectric constant corresponds to a higher proportion of fiberglass, resulting in better dimensional stability, lower thermal expansion coefficient, improved temperature drift, and a slight increase in dielectric loss.

Dielectric constant (Dk) of 2.17±0.04 at 10GHz Dissipation factor of 0.001 at 10GHz CTE x-axis of 25 ppm/°C, CTE y-axis of 34 ppm/°C, CTE z-axis of 240 ppm/°C, -55°C to 288°C Thermal coefficient of Dk at -150 ppm/°C, -55°C to 150°C Moisture absorption of ≤0.08% Flammability of UL-94 V0

Improved electrical performance compared to F4B220 Can replace similar imported PTFE laminates Suitable for non-PIM applications (ED copper foil version) Enhanced dimensional stability with precise Dk control Low loss with good insulation resistance UL-94 V0 flame retardant rating

Copper layer 1 – 35 μm F4BM217 Core – 0.1 mm (3.9mil) Copper layer 2 – 35 μm

Components: 5 Total Pads: 21 Thru Hole Pads: 15 Top SMT Pads: 6 Bottom SMT Pads: 0 Vias: 25 Nets: 2

Microwave, RF, and radar systems Phase shifters Passive Components Power dividers, couplers, combiners Feed networks Phased array antennas Satellite communications Base station antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BM217 Ultra-Thin PCB

PCB specifications

Base MaterialF4BM217
Layer Countdouble sided
Board Dimensions120mm × 89mm (±0.15mm)
Minimum Trace/Space6/7 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.17mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com