BICHENGPCBBicheng Technologies Limited

F4BM220 High-Performance 2-Layer PCB for Microwave and RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Wangling's F4BM220 laminates are developed through a precise formulation and pressing of fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film. Compared to F4B220, it offers improved electrical performance due to lower dielectric loss, higher insulation resistance, and enhanced stability, making it a suitable alternative to similar foreign products.

The F4BM220 and F4BME220 share the same dielectric layer but use different copper foil combinations: F4BM220 utilizes ED copper foil for applications without PIM requirements, while F4BME220 employs reverse-treated foil (RTF) for excellent PIM performance and reduced conductor loss.

By adjusting the ratio of PTFE to fiberglass cloth, both F4BM220 and F4BME220 achieve precise control over the dielectric constant, resulting in low loss and enhanced dimensional stability.

Dielectric Constant (Dk): 2.2 ± 0.04 at 10GHz Dissipation Factor: 0.001 at 10GHz CTE: X-axis: 25 ppm/°C Y-axis: 34 ppm/°C Z-axis: 240 ppm/°C (from -55°C to 288°C) Thermal Coefficient of Dk: -142 ppm/°C (from -55°C to 150°C) Moisture Absorption: ≤ 0.08% Flammability Rating: UL-94 V0

Components: 43Total Pads: 94Through-Hole Pads: 56Top SMT Pads: 38Bottom SMT Pads: 0Vias: 51Nets: 2

Microwave, RF, and radar systemsPhase shiftersPower dividers, couplers, and combinersFeed networksPhase-sensitive and phased array antennasSatellite communicationsBase station antennas

F4BM220 PCB 2-layer 1.575mm Thick

PCB specifications

Base MaterialF4BM220
Layer Count2 layers
Board Dimensions130.5mm x 103mm (1 piece, +/- 0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNone
Finished Board Thickness1.7mm
Finished Copper Weight1oz (1.4 mils) on outer layers
Via Plating Thickness20 µm
Surface FinishElectroless Nickel Immersion Gold (ENIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Testing100% electrical test prior to shipment

Layer stack-up

  1. Copper Layer 1 · 35 µmcopper
  2. F4BM220 Core · 1.575 mmcore
  3. Copper Layer 2 · 35 µmcopper

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com