BICHENGPCBBicheng Technologies Limited

F4BM220 2-Layer 0.5mm ENIG PCB for Microwave and Radar Systems

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Wangling's F4BM220 laminates are made by scientifically formulating and strictly pressing a combination of fiberglass cloth, polytetrafluoroethylene resin, and polytetrafluoroethylene film. Its electrical performance is improved compared to F4B220, mainly due to lower dielectric loss, increased insulation resistance, and improved stability. It can replace similar foreign products.

F4BM220 and F4BME220 have the same dielectric layer but different copper foil combinations: F4BM220 is paired with ED copper foil, suitable for applications without PIM requirements; F4BME220 is paired with reverse-treated foil (RTF) copper foil, offering excellent PIM performance, more precise line control, and lower conductor loss.

By adjusting the ratio between polytetrafluoroethylene and fiberglass cloth, F4BM220 and F4BME220 achieve precise control of the dielectric constant, providing low loss and enhanced dimensional stability. A higher dielectric constant corresponds to a higher proportion of fiberglass, resulting in better dimensional stability, lower thermal expansion coefficient, improved temperature drift, and a slight increase in dielectric loss.

Low Dielectric Constant: 2.2 ±0.04 at 10GHz Ultra-Low Loss: Dissipation factor of 0.001 at 10GHz Thermal Stability: CTE x-axis 25 ppm/°C, y-axis 34 ppm/°C, z-axis 240 ppm/°C (-55°C to 288°C) Dielectric Stability: Thermal coefficient of Dk -142 ppm/°C (-55°C to 150°C) Environmental Durability: Moisture absorption of ≤0.08% Safety Certified: Flammability of UL-94 V0

Copper Layer 1 - 35 μm F4BM220 Core - 0.5 mm Copper Layer 2 - 35 μm

Components: 5 Total Pads: 19 Thru Hole Pads: 11 Top SMT Pads: 8 Bottom SMT Pads: 0 Vias: 17 Nets: 2

Microwave, RF, and radar systems Phase shifters Power dividers, couplers, combiners Feed networks Phase-sensitive antennas, phased array antennas Satellite communications Base station antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BM220 PCB

PCB specifications

Base MaterialF4BM220
Layer CountDouble sided
Board Dimensions51mm × 67mm = 1PC, ±0.15mm
Minimum Trace/Space5/8 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com