BICHENGPCBBicheng Technologies Limited

18-Layer PCB with Premium RO4350B and RO4450F for Superior High-Frequency Performance

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1.Introduction to RO4350B Core and RO4450F Bondply:

Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics that offer electrical performance similar to PTFE/woven glass while maintaining the manufacturability of epoxy/glass. RO4350B laminates ensure tight control over dielectric constant (Dk) and exhibit low loss, utilizing standard epoxy/glass processing methods. These materials are available at a fraction of the cost of traditional microwave laminates and do not require special through-hole treatments or handling procedures like PTFE-based materials. They are UL 94 V-0 rated for active devices and high-power RF applications.

The thermal coefficient of expansion (CTE) of RO4350B material closely matches that of copper, providing excellent dimensional stability, essential for mixed dielectric multi-layer constructions. The low Z-axis CTE ensures reliable plated through-hole quality, even under severe thermal shock conditions. RO4350B material has a glass transition temperature (Tg) of over 280 °C (536 °F), maintaining stable expansion characteristics throughout the entire range of circuit processing temperatures.

RO4450F bondplys are compatible with multi-layer constructions involving RO4000 laminates. A high post-cure Tg makes RO4450F bondply an ideal choice for multi-layer assemblies requiring sequential laminations. Fully cured RO4450F bondplys can withstand multiple lamination cycles. Additionally, FR-4 compatible bonding requirements allow for the combination of RO4450F bondply and low-flow FR-4 bondply in non-homogeneous multi-layer constructions using a single bonding cycle.

Dielectric Constant: Dk 3.48 ±0.05 at 10 GHz/23 °CDissipation Factor: 0.0037 at 10 GHz/23 °CThermal Conductivity: 0.69 W/m/°KX-axis CTE: 10 ppm/°C, Y CTE: 12 ppm/°C, Z CTE: 32 ppm/°CHigh Tg Value: >280 °CLow Water Absorption: 0.06%

Dielectric Constant: Dk 3.52 ±0.05 at 10 GHz/23 °CDissipation Factor: 0.004 at 10 GHz/23 °CThermal Conductivity: 0.65 W/m/°KX-axis CTE: 19 ppm/°C, Y CTE: 17 ppm/°C, Z CTE: 50 ppm/°C

Components Count: 651Total Pads: 779Through Hole Pads: 338Top SMT Pads: 262Bottom SMT Pads: 179Vias Count: 632Nets Count: 12

Type of Artwork Supplied: Gerber RS-274-XQuality Standard: IPC-Class-2Availability: Worldwide

Cellular Base Station Antennas and Power AmplifiersRF Identification TagsAutomotive Radar and SensorsLNBs for Direct Broadcast Satellites

18-Layer RO4350B PCB Stackup Design

PCB specifications

Base MaterialRO4350B + RO4450F
Layer Count18 layers
Board Dimensions218 mm x 497 mm (1 PCS, +/- 0.15 mm)
Minimum Trace/Space4/4 mils
Minimum Hole Size0.4 mm
Blind ViasL11-L18, mechanical drill
Finished Board Thickness3.2 mm
Finished Copper Weight1 oz (1.4 mils) for inner and outer layers
Via Plating Thickness20 µm
Surface FinishImmersion Gold + Selective Hard Gold (50 microinches)
Top Silkscreen ColorWhite
Bottom Silkscreen ColorWhite
Top Solder Mask ColorBlue
Bottom Solder Mask ColorBlue
Via in Pad RequiredYes, press-fit holes required
All ViasResin filled and capped
Testing100% Electrical testing conducted prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com