Laminate data sheet
Megtron 6
9 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | R-5775(G) | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Glass Transition Temp (Tg, DSC) | 185 | — | °C | Condition A | DSC |
| CTE (Z, α1, pre-Tg) | 45 | Z | ppm/°C | Condition A | IPC-TM-650 2.4.24 |
| CTE (Z, α2, post-Tg) | 260 | Z | ppm/°C | Condition A | IPC-TM-650 2.4.24 |
| T288 (with copper) | >120 | — | min | Condition A | IPC-TM-650 2.4.24.1 |
| Dielectric Constant (Dk) | 3.7 | Z | — | C-24/23/50 | IPC-TM-650 2.5.5.9 |
| Dielectric Constant (Dk) @ 13 GHz | 3.62 | Z | — | C-24/23/50 | Balanced-type circular disk resonator |
| Dissipation Factor (Df) | 0.002 | Z | — | C-24/23/50 | IPC-TM-650 2.5.5.9 |
| Dissipation Factor (Df) @ 13 GHz | 0.0046 | Z | — | C-24/23/50 | Balanced-type circular disk resonator |
| Peel Strength (1 oz / 35 µm H-VLP Cu) | 0.8 | — | kN/m | Condition A | IPC-TM-650 2.4.8 |
Boards built on this laminate
12 Layer High Speed PCB Megtron M6 2.5mm ENIG Finish Impedance Control
Detailed Analysis of 16-Layer M6 HDI High-Speed PCBs with 2.0mm Thickness
M6 High Speed PCB: Panasonic R-5775 Low Loss Multilayer Circuit Board
M6 High Speed Low Loss Multilayer Printed Circuit Board (Megtron 6 PCB)
MEGTRON6 R-5775(G) 14-Layer PCB | Panasonic M6 2.123mm High Speed Low Loss with ENEPIG
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote