Rogers RO4730G3 微波电路板 2 层 Rogers 4730 30mil (0.762mm) 电路板,DK3.0,DF 0.0028 高频电路板
(Note: Printed Circuit Boards are custom-made products; the pictures and parameters shown are for reference only.)
产品简介
This double-sided RF PCB is constructed with 0.762mm (30mil) RO4730G3 material, designed specifically for wireless telecommunications antennas. The board features no solder mask on either side, and both surfaces are finished with immersion gold.
Rogers RO4730G3 antenna-grade laminates offer a reliable and cost-effective alternative to traditional PTFE-based laminates. This material possesses the essential mechanical and electrical properties required by antenna designers. The dielectric constant is 3.0, with a loss tangent of 0.0022 measured at 2.5 GHz using LoPro Reverse Treated EDC foil. These characteristics enable antenna designers to achieve significant gain while minimizing signal loss. Additionally, these materials demonstrate low Passive Intermodulation (PIM) performance, with values exceeding -160dBc.
RO4730G3 materials are compatible with standard epoxy and high-temperature lead-free solder processing. They do not require special treatments for plated through-hole preparation, unlike conventional PTFE-based laminates. Multi-layer configurations can be produced using RO4450F bondply at 175°C. The resin systems in RO4730G3 are specifically formulated to meet the demands of antenna designers. The glass transition temperature exceeds 280°C, resulting in a low Z-axis coefficient of thermal expansion (CTE), exceptional reliability for plated through holes, and suitability for lead-free solder processes.
Typical application is cellular base station antennas.
产品图片
规格参数
| Base Material | RO4730G3, 30mil (0.762mm) |
| Dielectric Constant | 3.0 ± 0.5 |
| Layer Count | 2 Layers |
| Type | Through holes |
| Format | 110mm x 100mm (1 type = 1 piece) |
| Surface Finish | Immersion gold |
| Copper Weight | Outer layer 35 μm |
| Solder Mask / Legend | None / White |
| Final PCB Height | 1.1 mm |
| Standard | IPC 6012 Class 2 |
| Packing | 20 pieces per shipment |
| Lead Time | 7 working days |
| Shelf Life | 6 months |
材料参数
RO4730G3 Typical Properties
| Property | RO4730G3 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.00 ± 0.05 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 2.98 | Z | — | 1.7–5 GHz | Microstrip |
| Dissipation Factor | 0.0028 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +34 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 9.0 × 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 7.2 × 10⁵ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| CTE (X) | 15.9 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14.4 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 35.2 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.45 | Z | W/(m·K) | 50°C | ASTM D5470 |
| Moisture Absorption | 0.093 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Td | >280 | — | °C | — | — |
| Density | 1.58 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 4.1 | — | pli | 1 oz LoPro EDC | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
