Rogers RO4730G3 高频电路板 2 层 Rogers 4730 20mil (0.508mm) 电路板 DK3.0 DF 0.0028 微波电路板
(Note: Printed Circuit Boards are custom-made products; the pictures and parameters shown are for reference only.)
产品简介
Rogers RO4730G3 antenna-grade laminates offer a reliable and cost-effective alternative to traditional PTFE-based laminates. This material provides the essential mechanical and electrical properties required by antenna designers. With a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz using LoPro Reverse Treated EDC foil, these values enable antenna designers to achieve significant gain while minimizing signal loss. The materials demonstrate low Passive Intermodulation (PIM) performance, with values exceeding -160dBc.
RO4730G3 is compatible with standard epoxy and high-temperature lead-free solder processing. Unlike conventional PTFE-based laminates, it does not require special treatments for plated through holes preparation. Multi-layer configurations can be achieved using RO4450F bondply at 175°C. The resin systems in RO4730G3 are engineered to deliver the desired properties for antenna design, featuring a glass transition temperature exceeding 280°C. This results in a low Z-axis coefficient of thermal expansion (CTE), excellent reliability for plated through holes, and compatibility with lead-free solder processes.
This is a double-sided RF PCB built on 0.508mm (20mil) RO4730G3, specifically designed for Cellular Base Station Antenna applications.
产品图片
规格参数
PCB Capability (RO4730G3)
| PCB Material: | Hydrocarbon ceramic woven glass |
| Designator: | RO4730G3 |
| Dielectric constant: | 3.0 ±0.05 (process) |
| 2.98 (design) | |
| Layer count: | 1-layer, 2-layer, Multi-layer, Hybrid configuration |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| Laminate thickness (low profile copper): | 5.7mil(0.145mm), 10.7mil(0.272mm), 20.7mil(0.526mm, 30.7mil(0.780mm), 60.7mil(1.542mm) |
| Laminate thickness (ED Copper) | 20mil(0.508mm), 30mil(0.762mm), 60mil(1.524mm) |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin, Immersion silver, ENEPIG, Pure gold, OSP,etc. |
材料参数
RO4730G3 Typical Properties
| Property | RO4730G3 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.00 ± 0.05 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 2.98 | Z | — | 1.7–5 GHz | Microstrip |
| Dissipation Factor | 0.0028 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +34 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 9.0 × 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 7.2 × 10⁵ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| CTE (X) | 15.9 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14.4 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 35.2 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.45 | Z | W/(m·K) | 50°C | ASTM D5470 |
| Moisture Absorption | 0.093 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Td | >280 | — | °C | — | — |
| Density | 1.58 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 4.1 | — | pli | 1 oz LoPro EDC | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Typical application is cellular base station antennas.
