BICHENGPCBBicheng Technologies Limited

F4BME275 1.6mm 2 层镀纯金高性能 PTFE 玻璃纤维电路板

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

产品简介

Wangling's F4BME275 is a high-performance PTFE composite laminate engineered for demanding RF and microwave applications. Precision-formulated from woven fiberglass cloth, PTFE resin, and film, it delivers superior, consistent electrical properties.

This next-generation material significantly outperforms its predecessor, F4B220, offering lower dielectric loss, higher insulation resistance, and enhanced stability. It serves as a reliable, high-performance domestic substitute for comparable imported laminates.

F4BME275 is clad with Reverse-Treated Foil (RTF) copper. This configuration provides superior low-PIM performance (≤ -159 dBc), enables more precise etching for fine-line circuits, and reduces conductor loss, making it ideal for high-precision designs.

This 2-layer rigid PCB is constructed with F4BME275 as the core material at 1.6mm (60mil) thickness, with pure gold 5μm surface finish, black top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 2.75 and ultra-low loss of 0.0015 make it ideal for demanding applications such as microwave systems, RF components, radar systems, and satellite communications.

This product is manufactured using woven fiberglass cloth, PTFE resin, and PTFE film through scientific formulation and strict pressing processes. Its electrical performance is significantly improved compared to F4B, offering a wider dielectric constant range, lower dielectric loss, increased insulation resistance, and enhanced stability. It can replace similar foreign products.

F4BM and F4BME share the same dielectric layer but use different copper foils: F4BM is paired with ED copper foil, suitable for applications without PIM requirements; F4BME is paired with Reverse-Treated Foil (RTF) copper, offering excellent PIM performance, more precise line control, and lower conductor loss.

F4BM and F4BME precisely adjust the dielectric constant by varying the ratio of PTFE to fiberglass cloth in the composite. This achieves low loss while enhancing dimensional stability. Higher dielectric constant corresponds to higher fiberglass content, resulting in better dimensional stability, lower thermal expansion coefficient, improved temperature drift, though with a marginal increase in dielectric loss.

Key material highlights: DK 2.17~3.0 available, customizable DK; low loss; F4BME with RTF copper offers excellent PIM performance; diverse sizes for cost optimization; radiation resistance; low outgassing; commercialized, high-volume, cost-effective.

技术特性与优势

  • Dielectric Constant (Dk): 2.75 ± 0.05 at 10GHz
  • Dissipation Factor (Df): 0.0015 at 10GHz; 0.0021 at 20GHz
  • Excellent PIM Performance: ≤ -159 dBc (with RTF copper)
  • CTE x-axis: 14 ppm/°C, CTE y-axis: 16 ppm/°C, CTE z-axis: 112 ppm/°C (-55°C to 288°C)
  • Thermal Coefficient of Dk: -92 ppm/°C (-55°C to 150°C)
  • Moisture Absorption: ≤0.08%
  • Flammability: UL-94 V-0
  • RTF Copper Foil — Precise etching, fine-line capability, reduced conductor loss
  • DK Range 2.17~3.0 Available — Customizable dielectric constant
  • Radiation Resistance & Low Outgassing for aerospace applications
  • Pure Gold 5μm Finish — Excellent solderability, corrosion resistance, and wire bondability
  • Stable DK (2.75 ± 0.05 @ 10GHz) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0015 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
  • Excellent PIM Performance (≤ -159 dBc) — Critical for low intermodulation distortion systems
  • PTFE Fiberglass Composite — Superior electrical properties with enhanced dimensional stability
  • RTF Copper Foil — More precise etching for fine-line circuits, lower conductor loss
  • Versatile DK Options — 2.17 to 3.0 available for design flexibility
  • Low CTE & Dimensional Stability — Reliable plated through holes and dimensional stability
  • Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • DK 2.75 ± 0.05 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0015 @ 10GHz:Ultra-low loss for high-frequency RF and microwave designs
  • PIM ≤ -159 dBc (RTF copper):Excellent passive intermodulation performance for critical RF systems
  • CTE: 14/16/112 ppm/K:Matched to copper, reliable plated through holes
  • TCDK: -92 ppm/°C:Low thermal coefficient of dielectric constant
  • Moisture Absorption ≤0.08%:Excellent stability in humid conditions
  • UL 94 V-0:Flame retardant for safety compliance
  • DK Range 2.17-3.0:Design flexibility for various frequency requirements
  • Pure Gold 5μm Finish:Excellent solderability, corrosion resistance, wire bondability

产品图片

F4BME275 PCB
F4BME275 Material

规格参数

Base materialWangling F4BME275 (PTFE + Fiberglass)
Layer count2-layer RF PCB
Board dimensions103mm x 76mm = 1 PCS, ±0.15mm
Minimum Trace/Space6/9 mils
Minimum Hole Size0.5mm
Blind viasNo
Finished board thickness1.6mm (including copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishPure Gold 5μm (197μ")
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
Standard Thickness (Dielectric or Total)0.1mm(介厚), 0.127mm(介厚), 0.2mm, 0.25mm, 0.5mm, 0.508mm, 0.762mm, 0.8mm, 1.0mm, 1.5mm, 1.524mm, 1.575mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm (± tolerance per thickness)
Thickness NoteFor DK ≤2.65, minimum dielectric thickness 0.1mm; for DK 2.7~3.0, minimum dielectric thickness 0.2mm
Standard Panel Sizes460x610mm, 500x600mm, 850x1200mm, 914x1220mm, 1000x1200mm
Custom Panel Sizes300x250mm, 350x380mm, 500x500mm, 840x840mm, 1000x1500mm
Note on SizesFor thickness ≥4.0mm or ≤0.2mm, max size 500x610mm
F4BM Copper Cladding (ED)0.5oz (18μm), 1oz (35μm), 1.5oz (50μm), 2oz (70μm)
F4BME Copper Cladding (RTF)0.5oz (18μm), 1oz (35μm)
DK Options2.17 ~ 3.0 (customizable DK)
Aluminum/Copper Base OptionF4BM***-AL, F4BME***-AL, F4BM***-CU, F4BME***-CU for shielding/heat dissipation
Special OptionsContact Wangling for non-standard thicknesses and custom sizes

叠层结构

  • Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
  • Layer: Dielectric, Material: F4BME275 Core, Thickness: 1.524 mm (60mil)
  • Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB 统计

  • Components: 37
  • Total Pads: 56
  • Thru Hole Pads: 37
  • Top SMT Pads: 19
  • Bottom SMT Pads: 0
  • Vias: 21
  • Nets: 7

应用领域

  • Microwave, RF, and radar systems
  • Phase shifters and passive components
  • Power dividers, couplers, and combiners
  • Feed networks and phased array antennas
  • Satellite communication and base station antennas
  • RF power amplifiers and high-frequency modules
  • Aerospace and defense applications
  • Microwave, RF, and radar systems
  • Phase shifters and passive components
  • Power dividers, couplers, and combiners
  • Feed networks and phased array antennas
  • Satellite communication and base station antennas
  • RF power amplifiers and high-frequency modules
  • Aerospace and defense applications

材料参数

F4BM / F4BME Series Typical Properties

PropertyF4BM217F4BM220F4BM233F4BM245F4BM255F4BM265F4BM275F4BM294F4BM300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.172.202.332.452.552.652.752.943.00——10 GHz—
Dk Tolerance±0.04±0.04±0.04±0.05±0.05±0.05±0.05±0.06±0.06————
Dissipation Factor, 10 GHz0.0010.0010.00110.00120.00130.00130.00150.00160.0017——10 GHz—
Dissipation Factor, 20 GHz0.00140.00140.00150.00170.00180.00190.00210.00230.0025——20 GHz—
Thermal Coefficient of Dk-150-142-130-120-110-100-92-85-80—ppm/°C-55 to 150°C—
Peel Strength (F4BM, 1oz ED)>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8—N/mm1 oz ED copper—
Peel Strength (F4BME, 1oz RTF)>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6—N/mm1 oz RTF copper—
Volume Resistivity≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>23>23>23>25>25>25>28>30>30—kV/mm5 kV, 500V/s—
Dielectric Breakdown (X/Y)>30>30>32>32>34>34>35>36>36—kV5 kV, 500V/s—
CTE (X, Y)25, 3425, 3422, 3020, 2516, 2114, 1714, 1612, 1512, 15X,Yppm/°C-55 to 288°C—
CTE (Z)2402402051871731421129895Zppm/°C-55 to 288°C—
Moisture Absorption≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08—%20±2°C, 24 hrs—
Density2.172.182.202.222.252.252.282.292.29—g/cm³Room temp—
Thermal Conductivity (Z)0.240.240.280.300.330.360.380.410.42ZW/(m·K)——
Continuous Operating Temp-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260—°C——
FlammabilityV-0V-0V-0V-0V-0V-0V-0V-0V-0———UL94

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com