BICHENGPCBBicheng Technologies Limited

F4BTM298 10mil 2 层沉金高频电路板 — PTFE 陶瓷填充基材

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

产品简介

Wangling's F4BTM298 laminates are made by scientifically formulating fiberglass cloth, nano-ceramic filling, and polytetrafluoroethylene resin, followed by strict pressing processes. The series is based on the F4BM dielectric layer, with the addition of high dielectric and low loss nano-level ceramics, resulting in higher dielectric constant, improved heat resistance, lower thermal expansion coefficient, higher insulation resistance, and better thermal conductivity, while maintaining low loss characteristics.

F4BTM298 and F4BTME298 share the same dielectric layer but use different copper foils: F4BTM is paired with ED copper foil, suitable for applications without PIM requirements, while F4BTME is paired with reverse-treated (RTF) copper foil, offering excellent PIM performance, more precise line control, and lower conductor loss.

This 2-layer rigid PCB is constructed with F4BTM298 as the core material at 10mil (0.254mm) thickness, with immersion gold surface finish, black top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 2.98 offers excellent high-frequency performance with low loss, making it ideal for demanding applications such as microwave systems, RF components, radar systems, and satellite communications.

Key material highlights: DK 2.98~3.5可选; added ceramic for enhanced performance; F4BTME has excellent PIM performance; rich thickness options; diverse sizes for cost optimization; commercialized, high-volume, cost-effective; radiation resistance and low outgassing.

技术特性与优势

  • Dielectric Constant (Dk): 2.98 ± 0.06 at 10GHz
  • Dissipation Factor (Df): 0.0018 at 10GHz
  • CTE x-axis: 15 ppm/°C, CTE y-axis: 16 ppm/°C, CTE z-axis: 78 ppm/°C (-55°C to 288°C)
  • Low Thermal Coefficient of Dk: -78 ppm/°C (-55°C to 150°C)
  • Moisture Absorption: ≤0.05%
  • Flammability: UL-94 V-0
  • High Thermal Conductivity: 0.42 W/(M·K) for efficient heat dissipation
  • Excellent PIM Performance (F4BTME version with RTF copper: ≤ -160 dBc)
  • Radiation resistance and low outgassing for aerospace applications
  • Immersion Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
  • Stable DK (2.98 ± 0.06 @ 10GHz) — Consistent impedance control for high-frequency designs
  • Low Df (0.0018 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
  • Nano-Ceramic Filled PTFE — Higher dielectric constant, improved heat resistance, lower CTE
  • Versatile DK Options — 2.98 to 3.5 available for design flexibility
  • Excellent PIM Performance — F4BTME variant with RTF copper offers ≤ -160 dBc
  • Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • Thick and Diverse Options — Wide range of thicknesses and panel sizes for cost optimization
  • Commercialized, High-Volume, Cost-Effective — Proven high-volume material
  • DK 2.98 ± 0.06 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0018 @ 10GHz:Low loss for high-frequency RF and microwave designs
  • CTE: 15/16/78 ppm/K:Matched to copper, reliable plated through holes
  • TCDK: -78 ppm/°C:Low thermal coefficient of dielectric constant
  • Moisture Absorption ≤0.05%:Excellent stability in humid conditions
  • UL 94 V-0:Flame retardant for safety compliance
  • Thermal Conductivity 0.42 W/M·K:Efficient heat removal for high-power applications
  • PIM ≤ -160 dBc (F4BTME):Excellent passive intermodulation performance
  • Immersion Gold finish:Excellent solderability, corrosion resistance, wire bondability

产品图片

F4BTM298 PCB
F4BTM298 Material

规格参数

Base materialWangling F4BTM298 (PTFE + Ceramic + Fiberglass)
Layer count2-layer
Board dimensions109mm x 54.5mm = 1 PCS, ±0.15mm
Minimum Trace/Space6/9 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.3mm (including copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
Standard Thickness (Total or Dielectric)0.254mm(10mil), 0.508mm(20mil), 0.762mm(30mil), 0.8mm, 1.0mm, 1.016mm(40mil), 1.27mm(50mil), 1.524mm(60mil), 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm (± tolerance per thickness)
Standard Panel Sizes460x610mm (18x24"), 600x500mm, 914x1220mm (36x48") — Note: ≥4.0mm not available in 914x1220mm
F4BTM Copper Cladding (ED)0.5oz (18μm), 1oz (35μm), 1.5oz (50μm), 2oz (70μm)
F4BTME Copper Cladding (RTF)0.5oz (18μm), 1oz (35μm)
DK Options2.98 ~ 3.5 (DK 2.98, 3.0, 3.2, 3.5 available)
Aluminum/Copper Base OptionF4BTM***-AL, F4BTME***-AL, F4BTM***-CU, F4BTME***-CU for shielding/heat dissipation
Special OptionsContact Wangling for non-standard thicknesses and custom sizes

叠层结构

  • Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
  • Layer: Dielectric, Material: F4BTM298 Core, Thickness: 0.254 mm (10mil)
  • Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB 统计

  • Components: 26
  • Total Pads: 87
  • Thru Hole Pads: 49
  • Top SMT Pads: 38
  • Bottom SMT Pads: 0
  • Vias: 31
  • Nets: 2

应用领域

  • Microwave, RF, and radar systems
  • Phase shifters and feed networks
  • Power dividers, couplers, and combiners
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications and base station antennas
  • RF power amplifiers and passive components
  • Aerospace and defense applications
  • Microwave, RF, and radar systems
  • Phase shifters and feed networks
  • Power dividers, couplers, and combiners
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications and base station antennas
  • RF power amplifiers and passive components
  • Aerospace and defense applications

材料参数

F4BTM298 / F4BTME298 Typical Properties

PropertyF4BTM298 / F4BTME298Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.98——10 GHz—
Dk Tolerance±0.06————
Dissipation Factor, 10 GHz0.0018——10 GHz—
Dissipation Factor, 20 GHz0.0023——20 GHz—
Thermal Coefficient of Dk-78—ppm/°C-55 to 150°C—
Peel Strength (F4BTM, 1oz ED)>1.6—N/mm1 oz ED copper—
Peel Strength (F4BTME, 1oz RTF)>1.4—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁷—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>26—kV/mm——
Dielectric Breakdown (X/Y)>34—kV——
CTE (X, Y)15, 16X,Yppm/°C-55 to 288°C—
CTE (Z)78Zppm/°C-55 to 288°C—
Moisture Absorption≤0.05—%20±2°C, 24 hrs—
Density2.25—g/cm³Room temp—
Thermal Conductivity (Z)0.42ZW/(m·K)——
PIM (F4BTME only)≤-160—dBc——
FlammabilityV-0———UL94

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com