4 层 RO3210 + RO4450F 混合电路板,含深度控制槽,适用于微波、雷达与相控阵应用
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
产品简介
Rogers RO3210 is a ceramic-filled PTFE composite laminate with a dielectric constant (Dk) of 10.2 ± 0.30 at 10GHz and a low dissipation factor (Df) of 0.0022, offering exceptional high-frequency performance. This material is ideal for commercial microwave and RF applications requiring high dielectric constant and stable electrical properties.
This 4-layer hybrid board combines two 0.508mm RO3210 cores with a single sheet of RO4450F prepreg (0.2mm) in a symmetrical stackup. The symmetrical construction is specifically designed to minimize warpage caused by the CTE mismatch between the ceramic-filled PTFE cores and the prepreg. The finished board is 1.22mm thick with 1oz copper on all layers and immersion silver + gold surface finish.
RO3210 is a ceramic-filled PTFE composite laminate offering a dielectric constant (Dk) of 10.2 ± 0.30 at 10GHz and a low dissipation factor (Df) of 0.0022. The material features a thermal coefficient of εr of -395 ppm/°C, ensuring stable electrical performance across a wide temperature range (-50°C to +150°C). With a thermal conductivity of 0.95 W/m/K and a decomposition temperature (Td) of 500°C, RO3210 provides excellent thermal management for high-frequency applications.
The material exhibits outstanding dimensional stability with X/Y CTE of 13/11 ppm/°C and Z-axis CTE of 16 ppm/°C (-55°C to 288°C), closely matched to copper for reliable plated through holes. Its low moisture absorption (0.05%) ensures consistent electrical performance in humid environments.
技术特性与优势
- Dielectric Constant (Dk): 10.2 ± 0.30 @ 10GHz (process)
- Design Dk: 11.20 (8 GHz - 40 GHz, differential phase length)
- Dissipation Factor (Df): 0.0022 @ 10GHz/23°C
- Thermal Coefficient of εr: -395 ppm/°C (-50°C to +150°C)
- High Thermal Conductivity: 0.95 W/m/K @ 50°C
- Low Moisture Absorption: 0.05%
- CTE: X/Y=13/11 ppm/°C, Z=16 ppm/°C (-55°C to 288°C)
- Decomposition Temperature (Td): 500°C
- Symmetrical 4-layer hybrid stackup
- Depth-controlled slot for embedded components
- Lead-Free Process Compatible, UL 94 V-0 flammability rating
- Excellent dimensional stability
- High Dk (10.2±0.30) — Enables compact circuit designs with reduced physical dimensions
- Low Df (0.0022 @ 10GHz) — Minimal signal loss for RF and microwave applications
- Symmetrical Stackup — Minimizes warpage caused by CTE mismatch between RO3210 and RO4450F
- CTE Matched to Copper — X/Y CTE of 13/11 ppm/°C ensures excellent dimensional stability
- High Thermal Conductivity (0.95 W/m/K) — Excellent heat dissipation for high-power applications
- RO4450F Prepreg — Low-flow, high-performance prepreg for hybrid bonding
- Immersion Silver + Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
- Depth-Controlled Slot — Enables embedded components and 3D packaging
- Dk 10.2 ± 0.30 @ 10GHz:High dielectric constant for compact circuit designs
- Df 0.0022 @ 10GHz:Low loss for high-frequency RF and microwave designs
- TCDK: -395 ppm/°C:Stable performance across temperature
- CTE: 13/11/16 ppm/°C:Excellent dimensional stability, reliable plated through holes
- Td: 500°C:Exceptional thermal stability for demanding applications
- Symmetrical Stackup:Minimizes warpage caused by CTE mismatch
- RO4450F Prepreg:High-performance bond line, excellent electrical properties
- Immersion Silver + Gold Finish:Excellent solderability, corrosion resistance, wire bondability
规格参数
| Base material (L1-L2) | Rogers RO3210 (Ceramic-filled PTFE) 0.508mm core, Dk 10.2 ± 0.30 |
| Prepreg (between L2-L3) | RO3210 prepreg, 0.2mm |
| Base material (L3-L4) | Rogers RO3210 (Ceramic-filled PTFE) 0.508mm core, Dk 10.2 ± 0.30 |
| Layer count | 4-layer |
| Board dimensions | 79mm x 79mm = 1 PCS |
| Finished board thickness | 1.22mm (pressed) |
| Finished Cu weight (outer) | 35μm (1 oz) |
| Finished Cu weight (inner) | 35μm (1 oz) |
| Depth-controlled slot | Yes |
| Surface finish | Immersion Silver + Gold |
| Solder mask | No |
| Silkscreen | No |
| 100% Electrical test | Used prior to shipment |
| Quality standard | IPC-6012 Class 3 |
| Standard Thicknesses (RO3210) | 0.005" (0.13mm) ±0.0005", 0.010" (0.25mm) ±0.0007", 0.020" (0.51mm) ±0.0010", 0.030" (0.76mm) ±0.0015", 0.060" (1.52mm) ±0.0030" |
| Standard Panel Sizes | 12"x18" (305x457mm), 24"x18" (610x457mm) |
| Electrodeposited Copper Foil | ½ oz (18μm), 1 oz (35μm) |
叠层结构
- Layer 1 (Top): Copper, 35 μm (1 oz)
- Dielectric: RO3210 Core, 0.508 mm (Dk 10.2 ± 0.30 @ 10GHz)
- Layer 2 (Inner): Copper, 35 μm (1 oz)
- Prepreg: RO3210 , 0.2 mm
- Layer 3 (Inner): Copper, 35 μm (1 oz)
- Dielectric: RO3210 Core, 0.508 mm (Dk 10.2 ± 0.30 @ 10GHz)
- Layer 4 (Bottom): Copper, 35 μm (1 oz)
应用领域
- Embedded Components: The slot can house embedded active or passive components, such as filters, capacitors, or MMICs, reducing the overall profile of the module.
- Connector Integration: It provides a recessed area for edge-launch connectors or other interface components, ensuring precise alignment and reliable connections.
- 3D Packaging: Enables 3D packaging by allowing components to be placed within the board thickness, saving valuable surface area.
- Thermal Management: Can be used to improve thermal dissipation by exposing inner layer copper planes for heat spreading or attaching heat sinks.
- Signal Integrity: In RF applications, depth-controlled slots can be used to create air-filled cavities that reduce dielectric loss and improve signal integrity.
- In this PCB, the depth-controlled slot is designed to expose the inner layers (L2-L3) for specific functional requirements, such as component mounting or signal routing, while maintaining the mechanical integrity and electrical performance of the board.
- Microwave, RF, and radar systems
- Phased array antennas
- Band pass filters
- Microstrip patch antennas
- Voltage-controlled oscillators (VCOs)
- Satellite communications and base station antennas
- High-frequency RF and microwave circuits
- Embedded component modules
材料参数
RO3210 Typical Properties
| Property | RO3210 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 10.20 ± 0.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 10.8 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -459 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10³ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 10³ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.12 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.81 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 13 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 13 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 34 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 11.0 (1.9) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 3.0 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
Total thickness: 1.22 mm (pressed)
Rogers RO3210 and RO4450F PP Hybrid Lamination: Prepreg Selection and Lamination Risk Points
The RO4450F prepreg is a critical choice for this hybrid stackup. With a nominal thickness of 0.2mm, it provides sufficient resin to bond the RO3210 cores while maintaining a low-profile bond line. However, the RO4450F prepreg has specific processing requirements that must be carefully controlled to ensure proper bonding. Lamination risks include:
- Resin starvation: The prepreg may not fully fill the etched areas on the inner layers, leading to voids or delamination.
- Insufficient bonding: The PTFE surface of RO3210 is notoriously difficult to bond. Proper surface treatment (e.g., sodium etching) is required to achieve adequate peel strength.
- CTE mismatch: The CTE of RO3210 (13/11 ppm/°C) is significantly lower than that of typical FR-4, creating stress at the interface during thermal cycling.
- Dimensional stability: RO3210 has a dimensional stability of -0.35/-0.31 mm/m, which must be considered when designing the artwork.
Heterogeneous Material Hybrid 4-Layer Board: CTE Matching Analysis of RO3210 Ceramic-Filled Substrate and RO4450F Prepreg
The CTE mismatch between RO3210 and RO4450F is a major concern in hybrid designs. RO3210 has an X/Y CTE of 13/11 ppm/°C, while RO4450F has an X/Y CTE that is typically higher. This mismatch can cause significant stress at the bond line during thermal cycling, potentially leading to delamination or warpage. The Z-axis CTE of RO3210 is 16 ppm/°C. The RO4450F prepreg (0.2mm) helps to minimize the overall CTE mismatch by providing a compatible bond line. Additionally, the symmetrical construction ensures that the CTE mismatch is balanced on both sides of the neutral axis, reducing warpage.
RO4450F Prepreg for RO3210 High-Frequency Board: Resin Flow, Fill, and Interlayer Bonding Control
The RO4450F prepreg is a high-performance material that requires careful control of the lamination process to ensure proper resin flow, fill, and interlayer bonding. Key process parameters include:
- Resin flow: The RO4450F prepreg has a specific resin flow that must be optimized for the RO3210 surface. This ensures that the prepreg completely fills large etched areas, preventing voids.
- Fill: The RO4450F prepreg must fill the gaps between the RO3210 cores and the copper features. Proper fill is essential for preventing delamination and ensuring reliable electrical performance.
- Interlayer bonding: The bond strength between the RO3210 cores and the RO4450F prepreg is critical. The RO3210 surface must be properly treated (sodium etching) to promote adhesion. The lamination cycle should be optimized to ensure complete cure of the prepreg and maximum bond strength.
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-6012 Class 3
- Availability: Worldwide
- 100% Electrical test prior to shipment
- ISO 9001:2015 & UL certified facility
技术解析:RO3210 + RO4450F 混压叠层设计
4-Layer RO3210 + RO4450F Hybrid Stackup Analysis: 0.508 + 0.2 + 0.508mm, 1.22mm Total Thickness Design Points
The stackup consists of two 0.508mm RO3210 cores bonded by a single sheet of RO4450F prepreg (0.2mm). This symmetrical construction (0.508 + 0.2 + 0.508mm) is critical for minimizing warpage. The total dielectric thickness before copper is 1.216mm, and with 1oz copper on all four layers (4 × 0.035mm = 0.14mm), the nominal finished thickness is approximately 1.356mm, which is rounded to 1.22mm in the design specification (pressed thickness). The high Dk of RO3210 (10.2) allows for significant size reduction in RF circuits, while the RO4450F prepreg provides a robust bond line with excellent electrical performance.
Symmetrical Stackup Improves Warpage of RO3210 Hybrid Board (Finished Thickness 1.22mm Example)
Warpage is a common problem in hybrid PCBs due to the CTE mismatch between different materials. In this 1.22mm thick example, the symmetrical stackup (0.508mm RO3210 + 0.2mm RO4450F + 0.508mm RO3210) is essential for minimizing warpage. The neutral axis is located at the center of the RO4450F prepreg, and the two RO3210 cores are identical in thickness and material properties. This symmetry ensures that the thermal expansion on both sides of the neutral axis is balanced, preventing the board from bowing or twisting during thermal cycling. Additionally, the RO4450F prepreg minimizes the volume of low-CTE material, which is the primary source of CTE mismatch. Post-lamination cooling should be controlled to reduce residual stress.
沉银 + 沉金表面处理
This PCB features a combined immersion silver + gold surface finish, which offers unique advantages for high-frequency applications:
- Immersion Silver: Provides excellent solderability and is highly conductive. It is ideal for high-frequency signal transmission due to its low insertion loss. However, silver can tarnish over time, so it is often combined with gold for enhanced reliability.
- Immersion Gold: Provides excellent corrosion resistance, wire bondability, and long-term reliability. Gold is inert and does not oxidize, making it ideal for applications requiring extended shelf life and reliable performance in harsh environments.
- Combined Finish: The combination of immersion silver and gold offers the best of both worlds: the excellent solderability and low loss of silver, with the corrosion resistance and reliability of gold. This finish is particularly suitable for RF and microwave applications where signal integrity and long-term reliability are critical.
Depth-Controlled Slot – What It Is and Its Function
A depth-controlled slot (also known as a depth-controlled cavity or blind slot) is a milled feature that extends from the top surface of the PCB to a specific depth, stopping at a designated layer. Unlike a through-hole or a standard slot, a depth-controlled slot does not penetrate the entire board thickness.
定义说明
- A slot with a precisely controlled depth, typically milled from the top or bottom surface.
- The depth is controlled to within tight tolerances (e.g., ±0.05mm or better) to ensure it stops at the desired layer.
- It can be used to expose inner layer pads, create cavities for embedded components, or provide access for connectors.
