BICHENGPCBBicheng Technologies Limited

RO3003™ + FR4 混合 4 层电路板,含 L2-L4 沉头槽,适用于微波、雷达与汽车应用

(Note: Printed Circuit Boards are custom-made. Images and parameters are for reference only.)

产品简介

Rogers RO3003 is a ceramic-filled PTFE composite laminate with a dielectric constant (Dk) of 3.00 ± 0.04 at 10GHz and an extremely low dissipation factor (Df) of 0.0010, offering exceptional high-frequency performance. This material is ideal for commercial microwave and RF applications, including automotive radar (up to 77GHz), band pass filters, microstrip patch antennas, and voltage-controlled oscillators.

This 4-layer hybrid board combines a 10mil (0.254mm) RO3003™ core with a 0.15mm FR4 TG170°C core, bonded together with prepreg. The stackup is finished with 1oz copper on outer layers and 0.5oz on inner layers. The board features a countersink slot from L2 to L4 with no plating required. With 1oz copper on all layers and ENIG surface finish, this PCB meets the demands of high-reliability microwave and RF applications.

RO3003™ is a ceramic-filled PTFE composite laminate offering a dielectric constant (Dk) of 3.00 ± 0.04 at 10GHz and an ultra-low dissipation factor (Df) of 0.0010. The material features a thermal coefficient of εr of -3 ppm/°C, ensuring stable electrical performance across a wide temperature range (-50°C to +150°C). With a thermal conductivity of 0.50 W/m/K and a decomposition temperature (Td) of 500°C, RO3003™ provides excellent thermal management for high-frequency applications.

The material exhibits outstanding dimensional stability with X/Y CTE of 17/16 ppm/°C and Z-axis CTE of 25 ppm/°C (-55°C to 288°C), closely matched to copper for reliable plated through holes. Its low moisture absorption (0.04%) ensures consistent electrical performance in humid environments.

技术特性与优势

  • Dielectric Constant (Dk): 3.00 ± 0.04 @ 10GHz (process)
  • Dissipation Factor (Df): 0.0010 @ 10GHz/23°C
  • Thermal Coefficient of εr: -3 ppm/°C (-50°C to +150°C)
  • High Thermal Conductivity: 0.50 W/m/K @ 50°C
  • Low Moisture Absorption: 0.04%
  • CTE: X/Y=17/16 ppm/°C, Z=25 ppm/°C (-55°C to 288°C)
  • Decomposition Temperature (Td): 500°C
  • Countersink slot L2-L4, no plating required
  • Lead-Free Process Compatible, UL 94 V-0 flammability rating
  • Excellent dimensional stability
  • Stable Dk (3.00±0.04) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0010 @ 10GHz) — Minimal signal loss for RF and microwave applications
  • Excellent Temperature Stability — TCDK of -3 ppm/°C ensures stable performance across temperature
  • Uniform Mechanical Properties — Ideal for multilayer board designs with different dielectric constants
  • Countersink Slot L2-L4 — Enables integration of components and connectors without plating
  • High Td (500°C) — Exceptional thermal stability for demanding applications
  • ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • Dk 3.00 ± 0.04 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0010 @ 10GHz:Ultra-low loss for high-frequency RF and microwave designs
  • TCDK: -3 ppm/°C:Excellent temperature stability, minimal variation
  • CTE: 17/16/25 ppm/°C:Excellent dimensional stability, reliable plated through holes
  • Td: 500°C:Exceptional thermal stability for demanding applications
  • Countersink Slot L2-L4:Enables component mounting without plating
  • IPC-6012 Class 3:High reliability for aerospace, defense, and automotive applications
  • ENIG finish:Excellent solderability, corrosion resistance, wire bondability

规格参数

Base material (L1-L2)Rogers RO3003™ (PTFE composite) 10mil (0.254mm) core, Dk 3.00 ± 0.04
Prepreg (between L2-L3)0.15mm
Base material (L3-L4)FR4 TG170°C, 0.15mm core
Layer count4-layer
Board dimensions127mm x 97mm = 5TYPES = 5PCS
Finished board thickness0.694mm (nominal)
Finished Cu weight (outer)35μm (1 oz)
Finished Cu weight (inner)35μm (1 oz)
Countersink slotL2-L4, no plating required
Surface finishENIG (Immersion Gold)
Solder maskGreen (both sides)
SilkscreenWhite (both sides)
100% Electrical testUsed prior to shipment
Quality standardIPC-6012 Class 3
Standard Thicknesses (RO3003)0.005" (0.13mm) ±0.0005", 0.010" (0.25mm) ±0.0007", 0.020" (0.51mm) ±0.0010", 0.030" (0.76mm) ±0.0015", 0.060" (1.52mm) ±0.0030"
Standard Panel Sizes12"x18" (305x457mm), 24"x18" (610x457mm)
Electrodeposited Copper Foil½ oz (18μm), 1 oz (35μm)
Rolled Copper Foil½ oz (18μm), 1 oz (35μm)

叠层结构

RO3003 + FR4 Stackup
RO3003 Stackup
  • Layer 1 (Top): Copper, 35 μm (1 oz)
  • Dielectric: RO3003™ Core, 0.254 mm (Dk 3.00 ± 0.04 @ 10GHz)
  • Layer 2 (Inner): Copper, 35 μm (1 oz)
  • Prepreg: 0.15 mm
  • Layer 3 (Inner): Copper, 35 μm (1 oz)
  • Dielectric: FR4 TG170°C Core, 0.15 mm
  • Layer 4 (Bottom): Copper, 35 μm (1 oz)

应用领域

  • Automotive radar (up to 77 GHz)
  • Microwave, RF, and radar systems
  • Band pass filters
  • Microstrip patch antennas
  • Voltage-controlled oscillators (VCOs)
  • Phased array antennas
  • Satellite communications and base station antennas

材料参数

RO3003 Typical Properties

PropertyRO3003Dir.UnitsConditionTest Method
Dielectric Constant (Design)3.00——8–40 GHzDifferential Phase Length
Dissipation Factor0.0010——23°C, 10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-3—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity10⁷—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity10⁷—MΩCondition AIPC-TM-650 2.5.17.1
Td500—°C (TGA)—ASTM D3850
CTE (X)17Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)16Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)25Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Thermal Conductivity0.50—W/(m·K)50°CASTM D5470
Copper Peel Strength12.7—lbs/in1 oz EDC after solder floatIPC-TM-650 2.4.8
Moisture Absorption0.04—%D48/50IPC-TM-650 2.6.2.1
Density2.1—g/cm³23°CASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Total thickness: 0.694 mm

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-6012 Class 3
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • ISO 9001:2015 & UL certified facility

L2–L4 沉槽(无需电镀)

  • Slot depth: From Layer 2 to Layer 4
  • Plating: Not required
  • Purpose: For component mounting or connector integration
  • Surface finish: ENIG over exposed pads

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com