BICHENGPCBBicheng Technologies Limited

混合射频与高频 4 层电路板,采用 16mil RO4003C + FR-4,沉锡

(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)

产品简介

Hello Everyone,

Today, we will discuss two types of 4-layer high frequency PCBs constructed with a 16mil core of RO4003C.

The design features a 4-layer structure, which is relatively simple and cost-effective, making it ideal for entering new markets.

技术特性与优势

  • The advantages of the 16mil RO4003C hybrid PCB include:
  • Stable Dielectric Constant: RO4003C maintains a stable dielectric constant across a broad frequency range, making it an excellent substrate for broadband applications.
  • Reduced Signal Loss: It minimizes signal loss in high frequency applications, meeting the evolving demands of communication technology.
  • Cost-Effectiveness: The cost is lower compared to stack-ups using all low-loss materials.

产品图片

4 Layer RO4003C Multilayer PCB Top View

规格参数

The standard thicknesses available for RO4003C are 0.008" (0.203mm), 0.012" (0.305mm), 0.016" (0.406mm), 0.020" (0.508mm), 0.032" (0.813mm), and 0.060" (1.524mm). These thicknesses are readily available in-house. We welcome your inquiries and patronage.

For more detailed specifications, please refer to the Data Sheet of Rogers 4003C (RO4003C).

叠层结构

Let's examine the stack-up first.

Stackup of 4 Layer RO4003C PCB Design 1

In the stack-up, the first and second layers consist of a 12mil core of RO4003C, while the third and fourth layers use a 16mil core of RO4003C. The fixed thickness of the core is crucial for maintaining the electrical length of RF lines on the circuit board. The two cores are bonded using bonding film (Prepreg).

Currently, two types of prepreg are used in multilayer high frequency PCBs: FR-4 dielectric and high frequency dielectrics, such as RO4450F, Cuclad 6250, and Taconic's FastRise-28 (FR-28).

The copper weight on the inner layer is 0.5 ounces, while the outer layers are 1 ounce. Blind vias are drilled through both cores.

Microsection of 4 Layer RO4003C PCB

The second board is a mixed PCB, utilizing FR-4 for layers three and four, while high frequency signals transmit through the high frequency substrate in layers one and two. The thickness of the dielectric material and FR-4 can be adjusted according to specific applications.

Stackup of 4 Layer Hybrid PCB with FR-4

应用领域

  • The 16mil RO4003C hybrid PCB has diverse applications, including: modular oscilloscopes; antenna combiners; balanced amplifiers; 4G antennas.

材料参数

RO4003C Typical Properties

PropertyRO4003CDir.UnitsConditionTest Method
Dielectric Constant (Process)3.38 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.55Z——Microstrip / Differential Phase Length
Dissipation Factor0.0027Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+40—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.7 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity4.2 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.04—%D48/50ASTM D570
Thermal Conductivity0.71ZW/(m·K)50°CASTM D5470
CTE (X)11Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)46Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength6.0 (1.05)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94
Lead-Free Process CompatibleYes————

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com