Wangling WL-CT330 4 层 2.7mm 沉金电路板 — 5G、雷达与卫星
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
WL-CT330 is a thermosetting high-frequency laminate composed of hydrocarbon resin, composite ceramics, and fiberglass reinforcement. It offers stable dielectric properties, ultra-low loss, and a high Tg (>280℃) for thermal reliability; processes like FR4 (simpler than PTFE), supports lead-free assembly (260℃), and is a cost-effective alternative to traditional high-frequency materials for high-speed RF designs.
This 4-layer rigid PCB combines WL-CT330 with High Tg FR-4 (S1000-2M) to achieve excellent mechanical stability, thermal reliability, and high-frequency signal integrity, making it ideal for demanding RF and microwave applications.
Dielectric Constant (DK): 3.30 ± 0.06 at 10GHz
Dissipation Factor (Df): 0.0026 at 10GHz
Thermal Resistance: T260 >60 mins, T288 >20 mins (typical for series)
Peel Strength (Min.): 0.85 N/mm (≈9.7 lbs/inch) for 1OZ ED Copper
CTE: X = 15 ppm/℃, Y = 13 ppm/℃, Z = 39 ppm/℃
High volume/surface resistivity (5×10⁹ Mohm·cm / Mohm)
Stable TcDk (temperature coefficient of DK)
Stable dielectric properties over frequency and temperature
Ultra-low loss for high-speed and high-frequency designs
High Tg (>280°C) ensures thermal reliability during lead-free assembly
Processable like standard FR4 – no special PTFE-specific handling required
Excellent dimensional stability with CTE matched to copper
High thermal conductivity for power applications
Cost-effective alternative to traditional high-frequency laminates
Reliable plated-through hole performance
Copper_layer_1 35 μm WL-CT330 1.524 mm (60 mil) Copper_layer_2 35 μm Prepreg 1080 RC63% + 7628 (43%) 0.254 mm (10 mil) Copper_layer_3 35 μm S1000-2M 0.8 mm (31.5 mil) Copper_layer_4 35 μm
Components: 45 Total Pads: 225 Thru Hole Pads: 126 Top SMT Pads: 59 Bottom SMT Pads: 40 Vias: 63 Nets: 9
5G/6G base stations & phased array antennas
Aerospace/defense radar (early warning, airborne)
High-speed backplanes & server/networking gear
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
9.WL-CT330 High-Frequency Laminate – Product Introduction
The WL-CT series (including WL-CT330) uses hydrocarbon resin and ceramic-filled fiberglass reinforcement, providing low-loss performance while maintaining FR4-like processability – much simpler than PTFE-based materials, ensuring better circuit consistency and stability. These materials can replace similar foreign products.
Available dielectric constants in the WL-CT series: 3.00, 3.30, 3.38, 3.48, 4.10, 6.15.
The series is available with ED copper or reverse-treated (RTF) copper foil. RTF copper foil offers excellent PIM performance, reduces conductor loss and insertion loss, and uses an adhesive treatment for better bonding.
Aluminum-backed versions (WL-CT***-AL) are also available for shielding or heat dissipation.
Low dielectric constant tolerance and low loss
Hydrocarbon ceramic thermoset resin system – better PCB processability and heat resistance
Excellent dielectric constant temperature stability
CTE in X/Y direction matched to copper; low Z-axis CTE for thermal stability and plated-through hole reliability
High Tg >280°C – maintains dimensional stability and copper hole quality at high temperatures
High thermal conductivity – better than comparable thermoplastic materials, suitable for high-power applications
Commercial, high-volume, cost-effective product
Excellent radiation resistance – maintains dielectric and physical properties after irradiation
Low outgassing – meets aerospace vacuum outgassing requirements
Aerospace equipment, space and airborne systems, aircraft
Microwave, antenna, phase-sensitive antennas
Early warning radar, airborne radar, and other radar systems
Phased array antennas, beamforming networks
应用领域
- Dielectric Constant (DK): 3.30 ± 0.06 at 10GHz
- Dissipation Factor (Df): 0.0026 at 10GHz
- Tg: >280℃
- Thermal Conductivity: 0.59 W/m·K
- Thermal Resistance: T260 >60 mins, T288 >20 mins (typical for series)
- Peel Strength (Min.): 0.85 N/mm (≈9.7 lbs/inch) for 1OZ ED Copper
- CTE: X = 15 ppm/℃, Y = 13 ppm/℃, Z = 39 ppm/℃
- Moisture Absorption: 0.05% (max.)
- UL 94-V0 flammability rating
- High volume/surface resistivity (5×10⁹ Mohm·cm / Mohm)
- Stable TcDk (temperature coefficient of DK)
