BICHENGPCBBicheng Technologies Limited

Rogers TMM10 2 层 15mil 高 Dk 热固性电路板,EPIG 无镍表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers TMM 10 thermoset microwave materials offer the benefits of both PTFE and ceramic based substrates, but is not limited by the same mechanical properties and production techniques.

Dielectric Constant (Dk) of 9.20 +/- .230 Dissipation factor of .0022 at 10GHz Thermal coefficient of Dk of -38 ppm/°K Coefficient of thermal expansion matched to copper Decomposition Temperature (Td) of 425 °C TGA Coefficient of Thermal Expansion - x y z : 21ppm/K, 21ppm/K, 20ppm/K Thermal Conductivity of 0.76W/mk Available in a thickness range of .0015 to .500 inches +/- .0015”

Mechanical properties resist creep and cold flow Resistant to process chemicals, reducing damage during fabrication Material does not require a sodium napthanate treatment prior to electroless plating Based on a thermoset resin, allowing for reliable wire-bonding

Copper layer 1 – 35 μm Rogers TMM10 Core – 0.381 mm (15mil) Copper layer 2 – 35 μm

Components: 25 Total Pads: 36 Thru Hole Pads: 12 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 25 Nets: 2

Chip testers Dielectric polarizers Satellite communication systems GPS antennas, and patch antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers TMM10 PCB

规格参数

Base MaterialTMM10
Layer CountDouble sided
Board Dimensions85mm × 120mm (±0.15mm)
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.5mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理EPIG (Electroless Palladium Immersion Gold, Nickel-free)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com