BICHENGPCBBicheng Technologies Limited

F4BTMS430 2 层 10mil 先进陶瓷填充 PTFE 电路板,沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

The F4BTMS series is an upgraded version of the F4BTM series. It has achieved a technological breakthrough in material formulation and manufacturing processes. The material has been enriched with a significant amount of ceramics and reinforced with ultra-thin and ultra-fine glass fiber cloth, resulting in substantial improvements in material performance and a broader range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.

By incorporating a small amount of ultra-thin and ultra-fine glass fiber cloth and a large amount of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the negative effects of glass fiber on electromagnetic wave propagation are minimized. This reduces dielectric loss, enhances dimensional stability, and decreases the X/Y/Z anisotropy of the material. It also increases the usable frequency range, improves electrical strength, and enhances thermal conductivity. Additionally, the material exhibits excellent low thermal expansion coefficient and stable dielectric temperature characteristics.

The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases.

Dielectric constant (Dk) of 4.3 at 10GHz Dissipation factor of 0.0019 at 10GHz, 0.0024 at 20GHz CTE x-axis of 13 ppm/°C, CTE y-axis of 12 ppm/°C, CTE z-axis of 47 ppm/°C, -55°C to 288°C Low Thermal coefficient of Dk at -60 ppm/°C, -55°C to 150°C High Thermal conductivity of 0.63 W/mk Low Moisture absorption of 0.08% UL-94V0

Enhanced ceramic content and ultra-fine glass fiber reinforcement Reduced dielectric loss and improved dimensional stability Lower material anisotropy and extended usable frequency range Higher electrical strength and improved thermal conductivity Excellent low thermal expansion and stable dielectric temperature characteristics Standard RTF copper foil reduces conductor loss and ensures strong peel strength Suitable for aerospace and high-reliability applications Can replace similar imported materials

Copper layer 1 – 35 μm F4BTMS430 Core – 0.254 mm (10mil) Copper layer 2 – 35 μm

Components: 15 Total Pads: 62 Thru Hole Pads: 30 Top SMT Pads: 32 Bottom SMT Pads: 0 Vias: 25 Nets: 2

Aerospace equipment, space and cabin equipment Microwave, RF Radar, military radar Feed networks Phase-sensitive antennas, phased array antennas Satellite communications, and more.

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

F4BTMS430 PCB

规格参数

Base MaterialF4BTMS430
Layer Count2 layers
Board Dimensions78.63mm × 96.55mm (±0.15mm)
Minimum Trace/Space6/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.3mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理Immersion Gold (ENIG)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com