BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 5880 FR-4 4 层 1.0mm 高频射频微波电路板 沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

1.Introduction to RT/duroid 5880 + FR-4 4-Layer Hybrid PCB

This 4-layer copper (6-layer structure) rigid hybrid PCB is constructed with Rogers RT/duroid 5880 and High Tg FR-4 as the base materials. RT/duroid 5880 is a glass microfiber reinforced PTFE composite designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity. The dielectric constant of RT/duroid 5880 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880 laminates to Ku-band and above. The board features immersion gold (ENIG) surface finish with 2 microinches gold thickness, blue solder mask, white silkscreen, 25μm via plating thickness, IPC-Class-3 quality standard, and controlled depth routing. The finished board thickness is 1.0mm with board dimensions of 90mm x 80mm.

Dielectric constant (process): 2.20 ±0.02 at 10 GHz / 23°C Dielectric constant (design): 2.20 at 8 to 40 GHz Dissipation factor: 0.0004 at 1 MHz, 0.0009 at 10 GHz / 23°C Thermal coefficient of Dk: -125 ppm/°C (-50 to 150°C) Volume resistivity: 2 x 10⁷ MΩ·cm (C96/35/90) Surface resistivity: 3 x 10⁷ MΩ (C96/35/90) Specific heat: 0.96 J/g/K (0.23 cal/g/°C) Tensile modulus X at 23°C: 1,070 MPa (156 kpsi) Tensile modulus Y at 23°C: 860 MPa (125 kpsi) Tensile strength X at 23°C: 29 MPa (4.2 kpsi) Tensile strength Y at 23°C: 27 MPa (3.9 kpsi) Moisture absorption: 0.02% (0.062" sample, D48/50) Thermal conductivity: 0.20 W/m/K at 80°C CTE X-axis: 31 ppm/°C (0-100°C) CTE Y-axis: 48 ppm/°C (0-100°C) CTE Z-axis: 237 ppm/°C (0-100°C) Td: >500°C (TGA method) Density: 2.2 g/cm³ Copper peel strength: 5.5 N/mm (31.2 pli) for 1 oz EDC foil after solder float Flammability rating: UL 94 V-0 Lead-free process compatible: Yes

RT/duroid 5880 glass microfiber reinforced PTFE provides exceptional dielectric constant uniformity Low dissipation factor (0.0009 at 10 GHz) extends usefulness to Ku-band and above Dk is constant over a wide frequency range Uniform Dk from panel to panel for consistent performance Resistant to all solvents and reagents used in etching printed circuits or plating edges and holes Easily cut, sheared and machined to shape CTE matched designs possible with hybrid FR-4 construction ENIG surface finish with 2μ" gold provides excellent solderability and corrosion resistance IPC-Class-3 quality for high-reliability applications Controlled depth routing for precise mechanical features

4.RT/duroid 5880 + FR-4 4-Layer Hybrid PCB Construction Details

L1 Copper: 0.035 mm Core RT/duroid 5880: 0.254 mm Copper: 0.018 mm Prepreg 2116 (RC53%) x 1: 0.12 mm Core FR-4: 0.1 mm Prepreg 2116 (RC53%) x 1: 0.12 mm Copper: 0.018 mm Core FR-4: 0.254 mm L4 Copper: 0.035 mm

Stripline and microstrip circuit applications Aerospace and defense systems Satellite communication systems Radar systems Millimeter wave applications Ku-band and above applications

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

8.RT/duroid 5880 High-Frequency Laminate – Product Introduction

RT/duroid 5880 glass microfiber reinforced PTFE composites are designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity. The dielectric constant of RT/duroid 5880 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880 laminates to Ku-band and above. RT/duroid 5880 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes. Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces per square foot on both sides, RT/duroid 5880 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specified.

9.Features and Benefits of RT/duroid 5880

Benefits: Exceptional dielectric constant uniformity from panel to panel Dk constant over wide frequency range Low dissipation factor for high frequency performance to Ku-band and above Easily cut, sheared and machined to shape Resistant to all solvents and reagents used in PCB fabrication Multiple cladding options available (EDC copper, rolled copper, aluminum, brass, copper plate)

Controlled depth routing is a precision machining technique used in PCB fabrication to route or mill to a specific depth without cutting through the entire board thickness. This allows for the creation of cavities, step cuts, or partial cutouts in the PCB. In this product, controlled depth routing is incorporated for precise mechanical features.

13.Fabrication Guidelines for RT/duroid 5880:

Storage: RT/duroid laminates can be stored indefinitely at normal ambient room temperatures (65°F to 85°F, 18°C to 30°C) and humidity levels. At room temperature, the dielectric materials are inert to high humidity.

Handling: PTFE-based materials are softer than most other rigid printed wiring board laminates and are more susceptible to handling damage. Gloves should be worn when handling panels.

Drilling: Carbide drills should be used. Standard style drills with an included lip angle of 130° are recommended. Optimum tool surface speed is 150 to 250 surface feet per minute with infeed rates of 0.0015" to 0.0025" per revolution. Drilled holes must be treated prior to deposition of a conductive seed layer. Sodium treatment is the preferred option for treating RT/duroid 5880 materials.

Hole Preparation: Sodium treatments consist of a highly reactive sodium napthalene complex in glycol ether solution. They are very effective at making PTFE surfaces wettable prior to metal deposition. Plasma treatment may be used for direct metallization processes.

Metallization: Low to regular deposition rate electroless copper processes may be used once the PTFE surface has been properly treated.

Final Metal Finishes: All final metal surface options (i.e. HASL, Sn, Sn/Pb, Ni/Au, Ag, OSP, etc.) can be applied using normal procedures.

4-layer RT5880-TG175 Hybrid PCB
Stackup of 4-layer RT5880-FR4

规格参数

Base materialRT/duroid 5880 (Rogers) + High Tg FR-4
Layer count4-layer copper (6-layer structure)
Board dimensions90mm x 80mm = 1PCS
Finished board thickness1.0mm
Inner layer copper weight0.5 oz
Finished copper weight1 oz (outer layers)
Via plating thickness25 μm
表面处理Immersion Gold (ENIG) with 2 microinches gold thickness
Top silkscreenWhite
Top solder maskBlue
Controlled depth routingYes
Accepted standardIPC-Class-3

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com