Rogers RT/duroid 5870 2 层 0.3mm 沉金电路板 — 微带与雷达应用
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
Rogers RT/duroid 5870 high frequency laminates are PTFE composites reinforced with glass microfibers, designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity.
The dielectric constant of RT/duroid 5870 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5870 laminates to Ku-band and above.
RT/duroid 5870 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes.
This 2-layer rigid PCB is constructed entirely with RT/duroid 5870 as the core material, providing exceptional signal integrity, dielectric constant uniformity, and low-loss performance for demanding RF, microwave, and millimeter wave applications.
Dielectric constant of 2.33 with tight tolerance ±0.02 at 10 GHz
Temperature coefficient of dielectric constant (TCDk) of -115 ppm/°C
CTE in X-axis of 22 ppm/°C, Y-axis of 28 ppm/°C and Z-axis of 173 ppm/°C
Uniform electrical properties over wide frequency range
Easily cut, sheared and machined to shape
Resistant to solvents and reagents used in etching or plating edges and holes
Lowest electrical loss for reinforced PTFE material
4.RT/duroid 5870 PCB Construction Details
Copper_layer_1 – 35 μm RT/duroid 5870 – 0.254 mm (10 mil) Copper_layer_2 – 35 μm
Components: 36 Total Pads: 56 Thru Hole Pads: 32 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 28 Nets: 2
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
9.RT/duroid 5870 High Frequency Laminates – Product Introduction
RT/duroid® 5870 glass microfiber reinforced PTFE composites are designed for exacting stripline and microstrip circuit applications.
The randomly oriented microfibers result in exceptional dielectric constant uniformity.
The dielectric constant of RT/duroid 5870 laminates is uniform from panel to panel and is constant over a wide frequency range.
Its low dissipation factor extends the usefulness of RT/duroid 5870 laminates to Ku-band and above.
Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ft² (8 to 70μm) or reverse treated EDC on both sides, RT/duroid 5870 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specified.
When ordering RT/duroid 5870 laminates, it is important to specify dielectric thickness, tolerance, rolled, electrodeposited or reverse treated copper foil, and weight of copper foil required.
13.Standard Thicknesses, Panel Sizes & Claddings
Standard Claddings (Electrodeposited Copper Foil)
Additional claddings such as heavy metal, resistive foil and unclad are available
应用领域
- Dielectric constant of 2.33 with tight tolerance ±0.02 at 10 GHz
- Dissipation factor of 0.0012 at 10GHz
- Temperature coefficient of dielectric constant (TCDk) of -115 ppm/°C
- Low Moisture Absorption of 0.02%
- CTE in X-axis of 22 ppm/°C, Y-axis of 28 ppm/°C and Z-axis of 173 ppm/°C
- Isotropic
