BICHENGPCBBicheng Technologies Limited

AGC RF-10 2 层 0.5mm ENEPIG 电路板 — 微带贴片与 GPS 天线

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

AGC RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass, engineered for high-power RF applications. RF-10 offers the advantage of a high dielectric constant (Dk) and low dissipation factor, enabling significant size reduction in RF circuits. The thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity, facilitating ease of handling and enhanced dimensional stability for multilayer circuits.

AGC RF-10 laminates are designed to provide a cost-effective substrate with industry-acceptable delivery times. They bond well to smooth, low-profile copper, and the combination of low dissipation factor and very smooth copper results in optimal insertion losses at higher frequencies where skin effect losses are substantial.

This 2-layer rigid PCB is constructed entirely with AGC RF-10 as the core material, making it ideal for demanding RF antenna and passive component applications.

High dielectric constant (Dk = 10.2 ± 0.3 at 10 GHz)

Low dissipation factor (Df = 0.0025 at 10 GHz)

High thermal conductivity (0.85 W/m·K, unclad)

X-axis CTE: 16 ppm/°C, Y-axis CTE: 20 ppm/°C, Z-axis CTE: 25 ppm/°C

High Dk enables RF circuit size reduction

High thermal conductivity for enhanced thermal management

Excellent adhesion to smooth copper foils

Low X, Y, Z expansion for plated through-hole reliability

5. PCB Stackup (2-Layer Rigid Structure)

Passive components (filters, couplers, power dividers)

Type of artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-3 Availability: Worldwide

9. AGC RF-10 Low-Loss Ceramic-Filled PTFE – Product Introduction

AGC RF-10 laminates are ceramic-filled PTFE composites reinforced with woven fiberglass. They are optimized for high-frequency, high-power RF applications requiring high dielectric constant and low signal loss. The thin woven glass reinforcement ensures mechanical rigidity and dimensional stability, while the ceramic filler provides a stable Dk and low dissipation factor.

AGC RF-10 can be sheared, drilled, milled, and plated using standard PTFE circuit board processing techniques. Its low Z-axis expansion enhances plated through-hole reliability and reduces scaling factors for artwork compensation.

Microstrip patch antennas GPS antennas Passive components (filters, couplers, power dividers) Aircraft collision avoidance systems Satellite components

13. Standard Thicknesses, Panel Sizes & Claddings

AGC RF-10 2-Layer ENEPIG PCB
CCL 133 RF-10

规格参数

Base materialAGC RF-10
Layer countDouble sided
Board dimensions143.6mm x 109.8mm = 2 Types = 2 PCS, ±0.15mm
Minimum Trace / Space5 / 7 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.5mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理ENEPIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com