RF-10 2 层 0.6mm 电路板 — 20mil 陶瓷填充 PTFE、沉银,适用于高频射频应用
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
1. Introduction to RF-10 2-Layer 0.6mm PCB
RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass, offering the advantage of high dielectric constant and low dissipation factor. The thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity for ease of handling, while enhancing dimensional stability for multilayer circuits. These laminates are engineered to deliver a cost-effective substrate with industry-acceptable delivery times, addressing the need for size reduction in RF applications. RF-10 bonds effectively with smooth low-profile copper, and its low dissipation factor combined with very smooth copper results in optimal insertion losses at higher frequencies where skin effect losses play a substantial role.
Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz High Thermal Conductivity: 0.85 W/m·K (Unclad) CTE: x-axis 16 ppm/°C, y-axis 20 ppm/°C, z-axis 25 ppm/°C Low Moisture Absorption: 0.08% Flammability Rating: UL 94 V-0
High DK enables RF circuit size reduction Excellent dimensional stability Tight DK tolerance (10.2 ± 0.3) Enhanced thermal management through high thermal conductivity Excellent adhesion to smooth copper surfaces Low CTE in X, Y, and Z directions Outstanding price/performance ratio
5. PCB Stackup (2-Layer Rigid Structure)
Copper_layer_1 - 35μm (1oz) RF-10 Core - 20mil (0.508mm) Copper_layer_2 - 35μm (1oz)
Components: 19Total Pads: 44Thru Hole Pads: 32Top SMT Pads: 12Bottom SMT Pads: 0Vias: 27Nets: 2
Microstrip patch antennasGPS antennasPassive components (filters, couplers, power dividers)Aircraft collision avoidance systemsSatellite components
Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide
