RF-10 电路板 2 层 125mil 高介电常数层压板,适用于微带贴片天线
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
产品简介
RF-10 copper clad laminates are advanced composites made from ceramic-filled PTFE and woven fiberglass. They offer high dielectric constant and low dissipation factor, making them suitable for high-frequency applications. The thin fiberglass reinforcement enhances both rigidity and dimensional stability, which is essential for multilayer circuit manufacturing.
These laminates are designed to be a cost-effective substrate with reliable delivery times. RF-10 addresses the demand for size reduction in RF applications. It adheres well to smooth, low-profile copper, optimizing insertion losses at higher frequencies where skin effect losses become significant.
Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz Thermal Conductivity: 0.85 W/mk (unclad) Coefficient of Thermal Expansion (CTE): -X: 16 ppm/°C -Y: 20 ppm/°C -Z: 25 ppm/°C Moisture Absorption: 0.08% Flammability Rating: V-0
High dielectric constant for compact RF circuit design Exceptional dimensional stability Tight dielectric constant tolerance (10.2 ± 0.3) Enhanced thermal management due to high thermal conductivity Strong adhesion to smooth copper surfaces Low expansion in X, Y, and Z directions Competitive price-to-performance ratio
Copper Layer 1: 35 μm (1 oz)RF-10 Core: 125 mil (3.175 mm)Copper Layer 2: 35 μm (1 oz)
Components: 12Total Pads: 20Through Hole Pads: 11Top SMT Pads: 9Bottom SMT Pads: 0Vias: 16Nets: 2
Microstrip Patch AntennasGPS AntennasPassive Components (filters, couplers, power dividers)Aircraft Collision Avoidance SystemsSatellite Components
