BICHENGPCBBicheng Technologies Limited

Wangling F4BME275 DK2.75 Df0.0015 PIM ≤-159dBc (0.2-12.0mm) RTF Copper Clad Laminate

Brief introduction

Wangling F4BME series are PTFE glass fabric copper-clad laminates that share the same dielectric layer as the F4BM series but utilize Reverse Treated Foil (RTF) copper. This configuration delivers excellent Passive Intermodulation (PIM) performance, more precise circuit control, and lower conductor loss, making it ideal for applications with stringent PIM requirements. F4BME275 is the variant with a dielectric constant of 2.75, featuring higher glass content for improved dimensional stability and lower CTE.

Technical features & benefits

  1. 1.Selectable Dielectric Constant (Dk) from 2.17 to 3.0; Dk 2.75 with customizable options available
  2. 2.Low dissipation factor (Df 0.0015 @10GHz, 0.0021 @20GHz)
  3. 3.Excellent PIM performance (≤ -159 dBc) due to Reverse Treated Foil (RTF) copper
  4. 4.More precise line control and lower conductor loss
  5. 5.Good dimensional stability and enhanced size control (improved with higher glass content)
  6. 6.Radiation resistance and low outgassing
  7. 7.Commercial, high-volume, cost-effective production
  8. 8.UL 94 V-0 flammability rating
  9. 9.Long-term operating temperature: -55°C to +260°C
  10. 10.Very low moisture absorption (≤0.08%)

Application areas

  • Microwave, RF, Radar
  • Phase Shifters, Passive Components
  • Power Dividers, Couplers, Combiners
  • Feed Networks, Phased Array Antennas
  • Satellite Communication, Base Station Antennas
  • Applications requiring excellent PIM performance
Wangling F4BME275 Laminate

Typical properties: Wangling F4BME275

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
Wangling F4BME275
PropertiesTest ConditionsUnitF4BME275
Electrical Properties
Dielectric Constant (Typical)10 GHz–2.75
Dielectric Constant Tolerance––±0.05
Dissipation Factor (Typical)10 GHz–0.0015
—20 GHz–0.0021
Temperature Coefficient of Dk-55°C to 150°Cppm/°C-92
Peel Strength1 oz. F4BMEN/mm>1.6
Volume ResistivityNormal ConditionMΩ·cm≥6×10⁶
Surface ResistanceNormal ConditionMΩ≥1×10⁶
Dielectric Strength (Z-direction)5 kW, 500 V/skV/mm>28
Breakdown Voltage (XY-direction)5 kW, 500 V/skV>35
PIM PerformanceOnly for F4BME seriesdBc≤ -159
Thermal & Mechanical Properties
CTEXY-direction, -55°C to 288°Cppm/°C14~16
—Z-direction, -55°C to 288°Cppm/°C112
Thermal Stress260°C, 10s, 3 cycles–No Delamination
Water Absorption20±2°C, 24 hours%≤0.08
DensityRoom Temperatureg/cm³2.28
Long-term Operating Temperature–°C-55 to +260
Thermal ConductivityZ-directionW/(m·K)0.38
Flammability Rating–UL-94V-0
Material Composition––PTFE, Glass Fiber Cloth; F4BME uses Reverse Treated Foil (RTF) copper

Available configurations

  • Copper Foil Options for F4BME: Reverse Treated Foil (RTF) Copper. Available thicknesses: 0.5 oz (0.018mm), 1 oz (0.035mm).
  • Standard Panel Sizes Available:
  • 460 × 610 mm
  • 500 × 600 mm
  • 850 × 1200 mm
  • 914 × 1220 mm
  • 1000 × 1200 mm
  • Available Thicknesses & Tolerances (Conventional):
  • Thickness (mm): 0.2 (core, minimum for Dk ≥2.7), 0.25, 0.5, 0.508, 0.762, 0.8, 1.0, 1.5, 1.524, 1.575, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0.
  • Corresponding tolerances range from ±0.02mm to ±0.20mm.
  • Note: For Dk ≥2.7, minimum core thickness is 0.2mm.
  • F4BME Series with Metal Core (Aluminum/Copper Base):
  • Models: F4BME*-AL (Aluminum base), F4BME*-CU (Copper base)
  • Serves for shielding or heat dissipation
  • Example: F4BME275-AL represents F4BME275 with aluminum base; F4BME275-CU represents F4BME275 with copper base
  • Standard sizes available: 460×610 mm, 460×305 mm; other sizes upon request

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com