BICHENGPCBBicheng Technologies Limited

Wangling F4BME217 DK2.17 PIM ≤-159dBc (0.1-12.0mm) Copper Clad Laminate

Brief introduction

F4BME217 is a PTFE-based, fiberglass-reinforced high-frequency laminate designed for RF and microwave printed circuit board applications requiring low Passive Intermodulation (PIM) performance. It uses reverse-treated RTF copper foil to deliver excellent signal integrity, precise circuit control, and reduced conductor loss, making it suitable for sensitive RF systems.

Technical features & benefits

  1. 1.Low and Stable Dielectric Constant: Dk = 2.17 ±0.04 at 10 GHz, ensuring consistent signal performance.
  2. 2.Low Loss Characteristics: Dissipation factor as low as 0.001 at 10 GHz, supporting high-frequency, low-loss designs.
  3. 3.Excellent PIM Performance: PIM value ≤ –159 dBc, ideal for demanding RF and cellular applications.
  4. 4.Good Thermal and Dimensional Stability: Low CTE and high thermal conductivity support reliable operation under thermal cycling.
  5. 5.High Insulation Resistance: Volume resistivity ≥6×10⁶ MΩ·cm, ensuring electrical reliability.

Application areas

  • RF and Microwave Circuits: Base station antennas, RF front-end modules.
  • Low-PIM Systems: Cellular infrastructure, distributed antenna systems (DAS).
  • Satellite Communications: Phased array antennas, feed networks.
  • Aerospace and Defense: Radar systems, electronic warfare platforms.
  • High-Frequency Test Equipment: Probes, fixtures, and calibration substrates.
Wangling F4BME217 Laminate

Typical properties: F4BME 217

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
F4BME 217
PropertyTest ConditionUnitF4BME217
Dielectric Constant (Typ.)10 GHz–2.17
Dk Tolerance––±0.04
Loss Tangent (Typ.)10 GHz–0.001
—20 GHz–0.0014
TC of Dk–55°C to 150°Cppm/°C–150
Peel Strength (1 oz)RTF CopperN/mm>1.6
Volume ResistivityAmbientMΩ·cm≥6×10⁶
Surface ResistivityAmbientMΩ≥1×10⁶
Dielectric Strength (Z)5 kV, 500 V/skV/mm>23
Breakdown Voltage (XY)5 kV, 500 V/skV>30
CTE (XY)–55°C to 288°Cppm/°C25–34
CTE (Z)–55°C to 288°Cppm/°C240
Water Absorption20±2°C, 24 h%≤0.08
DensityAmbientg/cm³2.17
Thermal Conductivity (Z)Z-directionW/(m·K)0.24
PIM Value–dBc≤–159
Flammability–UL 94V-0
Composition––PTFE, Fiberglass Cloth, Reverse-Treated RTF Copper Foil

Available configurations

  • Copper Foil: Reverse-treated RTF copper, 0.5 oz and 1 oz options.
  • Panel Sizes: 460×610 mm, 500×600 mm, 850×1200 mm, 914×1220 mm, 1000×1200 mm.
  • Thickness Range: 0.1 mm to 12.0 mm (minimum 0.1 mm for Dk ≤ 2.65).
  • Metal-Clad Options: Aluminum or copper-backed versions available (F4BME217–AL/CU).

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com