BICHENGPCBBicheng Technologies Limited

Wangling F4BM265 DK2.65 Df0.0013 (0.1-12.0mm) ED Copper Clad Laminate

Brief introduction

Wangling F4BM series are PTFE glass fabric copper-clad laminates made from PTFE resin, PTFE film, and woven glass fabric. They offer improved electrical performance over standard F4B, including a wider dielectric constant range, lower loss, higher insulation resistance, and better stability, making them suitable substitutes for similar international products. F4BM265 uses standard ED copper foil and is ideal for applications without PIM requirements.

Technical features & benefits

  1. 1.Selectable Dielectric Constant (Dk) from 2.17 to 3.0; Dk 2.65 with customizable options available
  2. 2.Low dissipation factor (Df 0.0013 @10GHz, 0.0019 @20GHz)
  3. 3.Good dimensional stability and enhanced size control
  4. 4.Radiation resistance and low outgassing
  5. 5.Commercial, high-volume, cost-effective production
  6. 6.UL 94 V-0 flammability rating
  7. 7.Long-term operating temperature: -55°C to +260°C
  8. 8.Very low moisture absorption (≤0.08%)

Application areas

  • Microwave, RF, Radar
  • Phase Shifters, Passive Components
  • Power Dividers, Couplers, Combiners
  • Feed Networks, Phased Array Antennas
  • Satellite Communication, Base Station Antennas
Wangling F4BM265 Laminate

Typical properties: Wangling F4BM265

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
Wangling F4BM265
PropertiesTest ConditionsUnitF4BM265
Electrical Properties
Dielectric Constant (Typical)10 GHz–2.65
Dielectric Constant Tolerance––±0.05
Dissipation Factor (Typical)10 GHz–0.0013
—20 GHz–0.0019
Temperature Coefficient of Dk-55°C to 150°Cppm/°C-100
Peel Strength1 oz. F4BMN/mm>1.8
Volume ResistivityNormal ConditionMΩ·cm≥6×10⁶
Surface ResistanceNormal ConditionMΩ≥1×10⁶
Dielectric Strength (Z-direction)5 kW, 500 V/skV/mm>25
Breakdown Voltage (XY-direction)5 kW, 500 V/skV>34
Thermal & Mechanical Properties
CTEXY-direction, -55°C to 288°Cppm/°C14~17
—Z-direction, -55°C to 288°Cppm/°C142
Thermal Stress260°C, 10s, 3 cycles–No Delamination
Water Absorption20±2°C, 24 hours%≤0.08
DensityRoom Temperatureg/cm³2.25
Long-term Operating Temperature–°C-55 to +260
Thermal ConductivityZ-directionW/(m·K)0.36
Flammability Rating–UL-94V-0
Material Composition––PTFE, Glass Fiber Cloth; F4BM uses ED copper foil

Available configurations

  • Copper Foil Options for F4BM: ED Copper Foil. Available thicknesses: 0.5 oz (0.018mm), 1 oz (0.035mm), 1.5 oz (0.05mm), 2 oz (0.07mm).
  • Standard Panel Sizes Available:
  • 460 × 610 mm
  • 500 × 600 mm
  • 850 × 1200 mm
  • 914 × 1220 mm
  • 1000 × 1200 mm
  • Available Thicknesses & Tolerances (Conventional):
  • Thickness (mm): 0.1 (core), 0.127 (core), 0.2, 0.25, 0.5, 0.508, 0.762, 0.8, 1.0, 1.5, 1.524, 1.575, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0.
  • Corresponding tolerances range from ±0.01mm to ±0.20mm.
  • Note: For Dk ≤ 2.65, minimum core thickness is 0.1mm.
  • F4BM Series with Metal Core (Aluminum/Copper Base):
  • Models: F4BM*-AL (Aluminum base), F4BM*-CU (Copper base)
  • Serves for shielding or heat dissipation
  • Example: F4BM265-AL represents F4BM265 with aluminum base; F4BM265-CU represents F4BM265 with copper base
  • Standard sizes available: 460×610 mm, 460×305 mm; other sizes upon request

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com