TLX-8 30mil Pure Gold High Frequency PCB - PTFE Fiberglass Microwave Substrate
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
Brief introduction
Taconic TLX-8 is a high volume fiberglass reinforced microwave substrate, a PTFE fiberglass laminate that offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs. TLX-8 PTFE fiberglass laminates are ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.
TLX-8 is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:
- Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
- High temperature exposure in engine modules
- Radiation resistance in space (see NASA's website for low outgassing materials)
- Resistance to extreme environments at sea for warship antennas
- Resistance to a wide temperature range for altimeter substrates during flight
Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
High temperature exposure in engine modules
Radiation resistance in space (see NASA's website for low outgassing materials)
Resistance to extreme environments at sea for warship antennas
Resistance to a wide temperature range for altimeter substrates during flight
This 2-layer rigid PCB is constructed with TLX-8 as the core material at 30mil (0.762mm) thickness, with pure gold surface finish, white top silkscreen, and 1oz copper on both sides. Its DK of 2.55 offers excellent high-frequency performance with low loss, making it ideal for demanding applications such as radar systems, mobile communications, and microwave test equipment.
TLX-8 offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs. TLX-8 PTFE fiberglass laminates are ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.
TLX-8 is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch, high temperature exposure in engine modules, radiation resistance in space, resistance to extreme environments at sea for warship antennas, and resistance to a wide temperature range for altimeter substrates during flight.
The wide range of dielectric constants available enable the manufacture of couplers, splitters, combiners, amplifiers, antennas and other components. TLX-8 has a long space heritage and is used wherever a woven fiberglass reinforcement is required.
Technical features & benefits
- Excellent PIM Values — Measured at lower than -160 dBc, ideal for high-performance RF systems
- Low and Stable DK — Dielectric Constant of 2.55 ± 0.04 @ 10GHz for consistent impedance control
- Low Dissipation Factor — 0.0018 @ 10GHz for minimal signal loss
- Excellent Mechanical & Thermal Properties — Reliable under extreme conditions
- Dimensionally Stable — Low MD/CD after bake and thermal stress
- Low Moisture Absorption — 0.02% for stable performance in humid environments
- UL 94 V-0 Rating — Flame retardant for safety compliance
- Long Space Heritage — Used wherever woven fiberglass reinforcement is required
- Pure Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
- Versatile DK Range (2.45-2.65) — Suitable for a wide range of microwave designs
- Low Layer Count Microwave Designs — Cost-effective for simpler RF circuits
- PTFE Fiberglass Reinforcement — Mechanical strength for severe environments
- Excellent PIM Performance (<-160 dBc) — Critical for low intermodulation distortion systems
- Low Outgassing — TML 0.03%, CVCM 0.00%, WVR 0.01% per ASTM E 595, suitable for space applications
- High Thermal Decomposition Temperature — Td 535°C (2% weight loss), 553°C (5% weight loss)
- Wide Thickness Range — Available from 0.0025" to 0.250" (0.064mm to 6.35mm)
- DK 2.55 ± 0.04 @ 10GHz:Stable dielectric constant for consistent impedance control
- Df 0.0018 @ 10GHz:Ultra-low loss for high-frequency RF and microwave designs
- PIM < -160 dBc:Excellent passive intermodulation performance for critical RF systems
- CTE: 21/23/215 ppm/K:Matched to copper, reliable plated through holes
- Td: 535°C (2% loss):High thermal stability for demanding environments
- Low Outgassing (TML 0.03%):NASA compliant, ideal for space applications
- UL 94 V-0:Flame retardant for safety compliance
- Moisture Absorption 0.02%:Excellent stability in humid conditions
- Pure Gold finish:Excellent solderability, corrosion resistance, wire bondability
Product images
PCB specifications
| Base material | Taconic TLX-8 (PTFE + Fiberglass) |
| Layer count | 2-layer |
| Board dimensions | 76.4mm x 98.6mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 5/7 mils |
| Minimum Hole Size | 0.3mm |
| Blind vias | No |
| Finished board thickness | 0.85mm (including copper) |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | Pure Gold |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Dielectric Thickness Range | 0.0025" - 0.250" (0.064mm - 6.35mm) |
| Thickness Increments | 0.005" (0.125mm) increments available |
| Standard Panel Sizes | 12"x18" (305x457mm), 16"x18" (406x457mm), 18"x24" (457x610mm), 16"x36" (406x914mm), 24"x36" (610x914mm), 18"x48" (457x1,220mm), 36"x48" (914x1,220mm) |
| Standard Copper Cladding | 1oz ED, 1oz RTF, ½oz ED, ½oz rolled |
| DK Range | 2.45 - 2.65 (TLX-8) |
| Special Options | Contact AGC for additional thicknesses, other sizes & any other type of cladding |
Layer stack-up
- Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
- Layer: Dielectric, Material: Taconic TLX-8 Core, Thickness: 0.762 mm (30mil)
- Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB Statistics
- Components: 30
- Total Pads: 41
- Thru Hole Pads: 25
- Top SMT Pads: 16
- Bottom SMT Pads: 0
- Vias: 27
- Nets: 2
Application areas
- Radar systems and phased array antennas
- Mobile communications infrastructure
- Microwave test equipment and transmission devices
- Couplers, splitters, combiners, and amplifiers
- Antennas for aerospace and defense
- Satellite communication systems
- RF components and passive devices
- Warship antennas and naval systems
- Radar systems and phased array antennas
- Mobile communications infrastructure
- Microwave test equipment and transmission devices
- Couplers, splitters, combiners, and amplifiers
- Antennas for aerospace and defense
- Satellite communication systems
- RF components and passive devices
- Warship antennas and naval systems
Properties
TLX Series Typical Properties
| Property | TLX-0 | TLX-6 | TLX-7 | TLX-8 | TLX-9 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|---|---|---|---|
| Dielectric Constant @ 10 GHz | 2.45 | 2.65 | 2.60 | 2.55 | 2.50 | — | — | 10 GHz | IPC-TM-650 2.5.5.3 |
| Dissipation Factor @ 1.9 GHz | 0.0009 | 0.0016 | 0.0014 | 0.0012 | 0.0010 | — | — | 1.9 GHz | IPC-TM-650 2.5.5.5.1 |
| Dissipation Factor @ 10 GHz | 0.0012 | 0.0022 | 0.0020 | 0.0017 | 0.0015 | — | — | 10 GHz | IPC-TM-650 2.5.5.5.1 |
| Dielectric Breakdown | >45 | >45 | >45 | >45 | >45 | — | kV | — | IPC-TM-650 2.5.6 |
| Moisture Absorption | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | — | % | — | IPC-TM-650 2.6.2.1 |
| Peel Strength (1oz ED) | — | — | — | 15 | — | — | lbs/in | After thermal stress | IPC-TM-650 2.4.8 |
| Surface Resistivity | — | — | — | 6.6×10⁸ | — | — | MΩ | Elevated temp | IPC-TM-650 2.5.17.1 |
| Volume Resistivity | — | — | — | 1.1×10¹⁰ | — | — | MΩ·cm | Elevated temp | IPC-TM-650 2.5.17.1 |
| CTE (X) (25–260°C) | — | — | — | 21 | — | X | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| CTE (Y) (25–260°C) | — | — | — | 23 | — | Y | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| CTE (Z) (25–260°C) | — | — | — | 215 | — | Z | ppm/°C | 25–260°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | — | — | — | 0.19 | — | — | W/(m·K) | — | ASTM F433 |
| Density | — | — | — | 2.25 | — | — | g/cm³ | — | ASTM D792 |
| Td (2% weight loss) | — | — | — | 535 | — | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Flammability | V-0 | V-0 | V-0 | V-0 | V-0 | — | — | — | UL94 |
Quality Assurance
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
