BICHENGPCBBicheng Technologies Limited

TFA294 DK2.94 Df0.001 (0.127-6.35mm) PTFE/Ceramic Composite Laminate

Brief introduction

TFA294 is a high-performance PTFE/ceramic composite dielectric substrate from the TFA series, manufactured without fiberglass weave using an advanced prepreg process and special lamination. It offers aerospace-grade reliability with excellent electrical, thermal, and mechanical properties, serving as a direct replacement for equivalent international products. The ceramic-filled resin matrix ensures isotropic performance, ultra-low loss, and exceptional frequency stability up to 77GHz and beyond.

Technical features & benefits

  1. 1.Tight dielectric constant tolerance with excellent batch-to-batch consistency
  2. 2.Lowest dissipation factor in its class (Df 0.001 @10GHz)
  3. 3.Operating frequency up to 77GHz, suitable for millimeter-wave and automotive radar
  4. 4.Excellent frequency and phase stability from -55°C to +150°C
  5. 5.Superior radiation resistance – stable dielectric and physical properties after irradiation
  6. 6.Low outgassing performance, compliant with space vacuum outgassing requirements
  7. 7.CTE matched to copper (X/Y: 18 ppm/°C) for reliable plated-through holes and dimensional stability
  8. 8.Low moisture absorption (0.03%) ensuring stable performance in humid environments
  9. 9.Standard PTFE PCB processing compatibility; suitable for multi-layer, high-layer, and backplane fabrication
  10. 10.Excellent machinability for dense hole patterns and fine-line circuitry

Application areas

  • Aerospace and aviation equipment, space and cabin devices, aircraft
  • Microwave, antenna, and phase-sensitive antenna systems
  • Early warning radar, airborne radar, and other radar systems
  • Phased-array antennas and beamforming networks
  • Satellite communications and navigation
  • Power amplifiers
TFA294 Laminate

Typical properties: TFA294

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
TFA294
PropertyTest ConditionUnitTFA294
Dielectric Constant (Typical)10GHz, Z-direction—2.94
Dielectric Constant (Design)10GHz, Z-direction—2.94
Dielectric Constant Tolerance——±0.04
Dissipation Factor (Typical)10GHz—0.001
Dissipation Factor (Typical)20GHz—0.001
Dissipation Factor (Typical)40GHz—0.0012
Temperature Coefficient of Dk-55°C ~ +150°CPPM/°C-5
Peel Strength (1 oz RTF copper)Thermal StressN/mm>1.6
Volume ResistivityNormal StateMΩ·cm≥5×10⁷
Surface ResistivityNormal StateMΩ≥5×10⁷
Dielectric Strength (Z-direction)5kW, 500V/sKV/mm>35
Breakdown Voltage (XY direction)5kW, 500V/sKV>40
CTE (X, Y direction)-55°C ~ 288°Cppm/°C18, 18
CTE (Z direction)-55°C ~ 288°Cppm/°C32
Thermal Stress260°C, 10s, 3x—No delamination
Moisture Absorption20±2°C, 24h%0.03
DensityRoom Temperatureg/cm³2.14
Long-term Operating Temperature—°C-55 ~ +260
Thermal Conductivity (Z-direction)—W/(M·K)0.59
FlammabilityUL-94—V-0
Td (Onset)TGA°C498
Material Composition——PTFE, Ceramic (for thickness >1.5mm, minimal fiberglass may be added)

Available configurations

  • Dielectric Constant: 2.94 ±0.04 (TFA294)
  • Dielectric Thickness Range: 0.127mm (5mil) to 6.35mm (250mil), with custom thicknesses available
  • Copper Cladding: Standard RTF low-profile copper (0.5oz, 1oz); optional rolled copper, embedded 50Ω resistor foil, copper base, or aluminum base
  • Available Panel Sizes: 305×460mm (12×18″), 460×610mm (18×24″), and custom sizes
  • Aluminum/Copper Base Versions: TFA294-AL (aluminum base) and TFA294-CU (copper base) for heat dissipation and shielding
  • Embedded Resistor Foil: 50Ω Ni-P alloy resistor film (0.2μm thickness, 50±5Ω/□)

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com