RT/Duroid 5880 20mil (0.508mm) Rogers High Frequency PCB for Radar Systems
(Note: Printed Circuit Boards are customized products. The images and specifications provided are for reference only.)
Brief introduction
Rogers RT/Duroid 5880 is a high-frequency material made from glass microfiber reinforced PTFE composites, specifically designed for demanding stripline and microstrip circuit applications. The unique structure ensures exceptional dielectric constant uniformity due to randomly oriented microfibers. This dielectric constant remains consistent across panels and stable over a broad frequency range.
This is a double-sided RF PCB built on RT/Duroid 5880, specifically designed for radar system applications.
Technical features & benefits
- Low Dissipation Factor: The low dissipation factor of RT/Duroid 5880 enhances its usability in Ku-band applications and beyond.
- Machinability: The materials can be easily cut, sheared, and machined into various shapes.
- Chemical Resistance: RT/Duroid 5880 is resistant to all solvents and reagents, hot or cold, typically used in etching printed circuits or plating edges and holes.
Product images
PCB specifications
| Basic Specifications | Description |
| Base Material | RT/Duroid 5880, 20mil (0.508mm) |
| Dielectric Constant | 2.20 ± 0.02 |
| Layer Count | 2 layers |
| Type | Through holes |
| Format | 128mm x 62mm (1 type = 1 piece) |
| Surface Finish | Immersion gold |
| Copper Weight | Outer layer 35 μm |
| Solder Mask / Legend | No / No |
| Final PCB Height | 0.52 mm |
| Standard | IPC 6012 Class 2 |
| Packing | 20 panels per shipment |
| Lead Time | 7 working days |
| Shelf Life | 6 months |
Application areas
- Commercial airline broadband antennas
- Microstrip circuits
- Stripline circuits
- Millimeter wave applications
- Military radar systems
- Missile guidance systems
- Point-to-point digital radio antennas
Properties
RT/duroid 5880 Typical Properties
| Property | RT/duroid 5880 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant, εr (Process) | 2.202.20±0.02 spec. | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr (Design) | 2.20 | Z | — | 8 GHz – 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.00040.0009 | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -125 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | Z | MΩ·cm | C96/35/90 | ASTM D257 |
| Surface Resistivity | 3 × 10⁷ | Z | MΩ | C96/35/90 | ASTM D257 |
| Specific Heat | 0.96 (0.23) | — | J/g·K (cal/g·°C) | — | Calculated |
| Moisture Absorption | 0.02 | — | % | 0.062" (1.6mm) D48/50 | ASTM D570 |
| Thermal Conductivity | 0.20 | Z | W/(m·K) | 80°C | ASTM C518 |
| CTE (X) | 31 | X | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 48 | Y | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 237 | Z | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| Td (Decomposition Temp.) | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.2 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 31.2 (5.5) | — | pli (N/mm) | 1 oz EDC foil after solder float | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
