Rogers TMM13i High-Frequency PCB – High DK 12.85 for Advanced RF and Microwave Applications
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
In the ever-evolving world of electronics, high-frequency PCBs play a crucial role in enabling cutting-edge technologies. The Rogers TMM13i High-Frequency PCB, available in thicknesses of 15mil, 20mil, 25mil, and 60mil, is a standout choice for engineers and designers working on RF and microwave applications. With a high dielectric constant (DK) of 12.85 and a low dissipation factor of 0.0019, this PCB material is designed to deliver exceptional performance in demanding environments.
Technical features & benefits
- High Dielectric Constant (DK 12.85): Optimized for high-frequency applications, ensuring minimal signal loss and superior performance in RF and microwave circuits.
- Low Dissipation Factor (0.0019): Ensures efficient signal transmission, making it ideal for applications requiring high signal integrity.
- Excellent Thermal Stability: Features a low thermal coefficient of dielectric constant and thermal expansion coefficients that closely match those of copper.
- High Thermal Conductivity: Facilitates effective heat removal, making it suitable for high-power applications.
- Immersion Gold Surface Finish: Provides excellent conductivity, corrosion resistance, and solderability.
Product images
Application areas
- RF and Microwave Circuitry
- Satellite Communication Systems
- Global Positioning Systems (GPS) Antennas
- Patch Antennas
- Power Amplifiers and Combiners
- Filters and Couplers
- Dielectric Polarizers and Lenses
- Chip Testers
Our PCB Capability
PCB Capability (TMM13i)
| PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
| Designation: | TMM13i |
| Dielectric constant: | 12.85 ± 0.35 |
| Layer count: | Single Layer, Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| Dielectric thickness: | 15mil, 20mil, 25mil, 30mil, 50mil, 60mil, 75mil, 100mil, 125mil, 150mil, 200mil, 250mil, 275mil, 300mil, 500mil |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion tin, Immersion silver, ENEPIG, Pure gold etc. |
Properties
TMM 13i Typical Properties
| Property | TMM 13i | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 12.85 ± 0.35 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 12.2 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0019 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -70 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | TBD | — | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | TBD | — | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.13 | — | % | D24/50 | ASTM D570 |
| Thermal Conductivity | 0.76 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 19 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 19 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 20 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 4.0 (0.7) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 3.0 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
