BICHENGPCBBicheng Technologies Limited

Rogers RT/Duroid 5880 High-Frequency PCB 10mil (0.254mm) for Microstrip and Stripline Circuits

(Note: Printed Circuit Boards (PCBs) are custom-made products; the images and specifications provided are for reference only.)

Brief introduction

Rogers RT/Duroid 5880 is a high-frequency material made from glass microfiber reinforced PTFE composites, specifically engineered for demanding stripline and microstrip circuit applications. The unique design features randomly oriented microfibers that ensure exceptional dielectric constant uniformity. This dielectric constant remains consistent across panels and stable over a wide frequency range.

Technical features & benefits

  • Low Dissipation Factor: The low dissipation factor enhances the utility of RT/Duroid 5880 in Ku-band applications and beyond.
  • Machinability: The material can be easily cut, sheared, and machined into various shapes.
  • Chemical Resistance: It demonstrates resistance to all solvents and reagents, whether hot or cold, commonly used in etching printed circuits or plating edges and holes.

Product images

RT/Duroid 5880 DK DF Chart
RT/Duroid 5880 PCB 10mil

PCB specifications

Rogers RT/Duroid 5880 10mil 0.254mm High Frequency PCB for Microstrip and Stripline Circuits

PCB SIZE130 x 100mm = 1PCS
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsYES
Minimum Trace and Space:5 mil / 4 mil
Minimum / Maximum Holes:0.2 mm / 0.2mm
Number of Different Holes:1
Number of Drill Holes:15
BOARD MATERIAL—
Glass Epoxy:RT/duroid 5880 0.254mm
Final foil external:1.0 oz
Final height of PCB:0.3 mm ±0.1
PLATING AND COATING—
Surface FinishImmersion gold
VIAPlated through hole(PTH), minimum size 0.22mm. Via tented.
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally.

Layer stack-up

  • copper ------- 18um(0.5 oz)+plate TOP layer
  • RT/duroid 5880 0.254mm
  • copper ------- 18um(0.5oz)+plate BOT Layer

Application areas

  • Commercial airline broadband antennas
  • Microstrip circuits
  • Stripline circuits
  • Millimeter wave applications
  • Military radar systems
  • Missile guidance systems
  • Point-to-point digital radio antennas

Properties

RT/duroid 5880 Typical Properties

PropertyRT/duroid 5880Dir.UnitsConditionTest Method
Dielectric Constant, εr (Process)2.202.20±0.02 spec.Z / Z—C24/23/501 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5
Dielectric Constant, εr (Design)2.20Z—8 GHz – 40 GHzDifferential Phase Length Method
Dissipation Factor, tan δ0.00040.0009Z / Z—C24/23/501 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5
Thermal Coefficient of εr-125Zppm/°C-50 to 150°CIPC-TM-650 2.5.5.5
Volume Resistivity2 × 10⁷ZMΩ·cmC96/35/90ASTM D257
Surface Resistivity3 × 10⁷ZMΩC96/35/90ASTM D257
Specific Heat0.96 (0.23)—J/g·K (cal/g·°C)—Calculated
Moisture Absorption0.02—%0.062" (1.6mm) D48/50ASTM D570
Thermal Conductivity0.20ZW/(m·K)80°CASTM C518
CTE (X)31Xppm/°C0–100°CIPC-TM-650 2.4.41
CTE (Y)48Yppm/°C0–100°CIPC-TM-650 2.4.41
CTE (Z)237Zppm/°C0–100°CIPC-TM-650 2.4.41
Td (Decomposition Temp.)500—°C (TGA)—ASTM D3850
Density2.2—g/cm³—ASTM D792
Copper Peel Strength31.2 (5.5)—pli (N/mm)1 oz EDC foil after solder floatIPC-TM-650 2.4.8
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com