Rogers RT/Duroid 5880 31mil (0.787mm) High Frequency PCB for Point-to-Point Digital Radio Antennas
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Rogers RT/Duroid 5880 is a high-frequency material composed of glass microfiber reinforced PTFE composites, specifically designed for demanding stripline and microstrip circuit applications. This material exhibits exceptional dielectric constant uniformity due to the random orientation of its microfibers. The dielectric constant of RT/Duroid 5880 remains consistent across panels and is stable over a wide frequency range.
With a low dissipation factor, RT/Duroid 5880 is effective for applications in the Ku-band and beyond. The material can be easily cut, sheared, and machined into desired shapes. Additionally, it is resistant to all solvents and reagents—whether hot or cold—commonly used in the etching of printed circuits or in plating edges and holes.
Technical features & benefits
- Low Dissipation Factor: The low dissipation factor of RT/Duroid 5880 enhances its usability in Ku-band applications and beyond.
- Machinability: The materials can be easily cut, sheared, and machined into various shapes.
- Chemical Resistance: RT/Duroid 5880 is resistant to all solvents and reagents, hot or cold, typically used in etching printed circuits or plating edges and holes.
Product images
PCB specifications
Rogers RT/Duroid 5880 31mil 0.787mm High Frequency PCB for Point to Point Digital Radio Antennas
| PCB SIZE | 91 x 62mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 4 mil / 4 mil |
| Minimum / Maximum Holes: | 0.3 mm / 4.2 mm |
| Number of Different Holes: | 9 |
| Number of Drill Holes: | 101 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RT/duroid 0.787mm (31 mil) |
| Final foil external: | 1 oz |
| Final height of PCB: | 0.9 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold |
| VIA | Plated through hole(PTH), minimum size 0.3mm. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RT/duroid 0.787mm (31 mil)
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Commercial airline broadband antennas
- Microstrip circuits
- Stripline circuits
- Millimeter wave applications
- Military radar systems
- Missile guidance systems
- Point-to-point digital radio antennas
Properties
RT/duroid 5880 Typical Properties
| Property | RT/duroid 5880 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant, εr (Process) | 2.202.20±0.02 spec. | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr (Design) | 2.20 | Z | — | 8 GHz – 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.00040.0009 | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -125 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | Z | MΩ·cm | C96/35/90 | ASTM D257 |
| Surface Resistivity | 3 × 10⁷ | Z | MΩ | C96/35/90 | ASTM D257 |
| Specific Heat | 0.96 (0.23) | — | J/g·K (cal/g·°C) | — | Calculated |
| Moisture Absorption | 0.02 | — | % | 0.062" (1.6mm) D48/50 | ASTM D570 |
| Thermal Conductivity | 0.20 | Z | W/(m·K) | 80°C | ASTM C518 |
| CTE (X) | 31 | X | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 48 | Y | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 237 | Z | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| Td (Decomposition Temp.) | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.2 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 31.2 (5.5) | — | pli (N/mm) | 1 oz EDC foil after solder float | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
