BICHENGPCBBicheng Technologies Limited

Rogers IsoClad 917 DK2.17/2.20 Df0.0013 Copper Clad Laminate

Brief introduction

IsoClad 917 is a nonwoven fiberglass reinforced PTFE laminate designed for high-frequency printed circuit board applications. With dielectric constants of 2.17 and 2.20, it offers low loss, high isotropy in all directions, and excellent flexibility, making it ideal for conformal antennas, stripline circuits, and advanced RF electronic systems.

Technical features & benefits

  1. 1.Low Dielectric Constant: Dk = 2.17 or 2.20 at 10 GHz, providing stable signal propagation.
  2. 2.Low Loss Characteristics: Dissipation factor of 0.0013 at 10 GHz, supporting high-frequency performance.
  3. 3.High Isotropic Properties: Uniform mechanical and electrical behavior in X, Y, and Z directions.
  4. 4.Excellent Electrical Insulation: Volume resistivity up to 1.5×10¹⁰ MΩ·cm, surface resistivity up to 1.0×10⁹ MΩ.
  5. 5.Good Thermal Stability: Thermal coefficient of Dk = –157 ppm/°C for reliable operation over temperature ranges.

Application areas

  • Conformal Antennas: Where flexibility and isotropic properties are required.
  • Stripline and Microstrip Circuits: High-frequency PCB designs for communication systems.
  • Missile Guidance Systems: Reliable performance in demanding aerospace environments.
  • Radar and Electronic Warfare Systems: Low-loss, high-stability substrates.
  • RF Test and Measurement: Calibration boards and probe cards.
Rogers IsoClad 917 Laminate
IsoClad 917 Chart 1
IsoClad 917 Chart 2

Typical properties: IsoClad 917

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
Data sheet of isoclad 917
PropertyTest MethodConditionIsoClad 917
Dielectric Constant @ 10 GHzIPC TM-650 2.5.5.5C23/502.17, 2.20
Dissipation Factor @ 10 GHzIPC TM-650 2.5.5.5C23/500.0013
Thermal Coefficient of DkIPC TM-650 2.5.5.5 Adapted–10°C to +140°C–157 ppm/°C
Peel Strength (lbs/in)IPC TM-650 2.4.8After Thermal Stress10
Volume Resistivity (MΩ·cm)IPC TM-650 2.5.17.1C96/35/901.5×10¹⁰
Surface Resistivity (MΩ)IPC TM-650 2.5.17.1C96/35/901.0×10⁹
Arc Resistance (seconds)ASTM D-495D48/50>180
Tensile Modulus (kpsi)ASTM D-638A, 23°C133, 120
Tensile Strength (kpsi)ASTM D-882A, 23°C4.3, 3.8
Compressive Modulus (kpsi)ASTM D-695A, 23°C182
Flexural Modulus (kpsi)ASTM D-790A, 23°C213
Dielectric Breakdown (kV)ASTM D-149D48/50>45
Density (g/cm³)ASTM D-792 Method AA, 23°C2.23
Water Absorption (%)MIL-S-13949H 3.7.7 / IPC TM-650 2.6.2.2E1/105 + D24/230.04
CTE – X Axis (ppm/°C)IPC TM-650 2.4.24 (Mettler 3000 TMA)0°C to 100°C46
CTE – Y Axis (ppm/°C)IPC TM-650 2.4.24 (Mettler 3000 TMA)0°C to 100°C47
CTE – Z Axis (ppm/°C)IPC TM-650 2.4.24 (Mettler 3000 TMA)0°C to 100°C236
Thermal Conductivity (W/m·K)ASTM E-1225100°C0.263
Outgassing – TML (%)NASA SP-R-0022A125°C, ≤10⁻⁶ torr0.02
Outgassing – CVCM (%)NASA SP-R-0022A125°C, ≤10⁻⁶ torr0.00
Outgassing – WVR (%)NASA SP-R-0022A125°C, ≤10⁻⁶ torr0.02
Visible CondensateNASA SP-R-0022A125°C, ≤10⁻⁶ torrNO
FlammabilityUL 94 Vertical Burn / IPC TM-650 2.3.10C48/23/50, E24/125Meets UL94-V0

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com