RF-35 High Frequency Double-Sided PCB: 60mil Thickness with Immersion Gold Finish
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Brief introduction
Introducing our RF-35 High Frequency Double-Sided PCB, expertly designed for high-performance applications. This PCB features:
- Construction: Double-sided with 2 layers of copper.
- Dimensions: 60mm x 21mm with a single unit in a panel.
- Soldering Pads: Designed for surface mount components; through-hole components are not included.
- Layer Stackup: Comprises 35um copper on both the top and bottom layers, with a core of RF-35 material (1.524mm thick).
- Surface Finish: Immersion gold, plating 95% of the area, with no solder mask applied.
Product images
PCB specifications
RF-35 High Frequency Double-Sided PCB: 60mil Thick with Immersion Gold Finish
| PCB SIZE | 60mm x 21mm = 1up |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 5 mil / 8 mil |
| Minimum / Maximum Holes: | 0.4 mm / 0.8 mm |
| Number of Drill Holes: | 21 |
| Number of Milled Slots: | 1 |
| Number of Internal Cutouts: | 1 |
| Surface Finish | Immersion gold, plated area 95% |
| Final foil external: | 1 oz |
| Final height of PCB: | 1.6 mm ±0.16 |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally |
Layer stack-up
- copper ------- 35um(0.5 oz+plate) TOP layer
- RF-35 1.524mm
- copper ------- 35um(0.5 oz+plate) BOT Layer
Properties
RF-35 Typical Properties
| Property | RF-35 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PTFE Ceramic - Glass | — | — | — | — |
| Dielectric Constant, Dk @ 10 GHz | 3.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dk Tolerance | ±0.10 | — | — | — | — |
| Dissipation Factor, Df @ 10 GHz | 0.0018 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Moisture Absorption | 0.03 | — | % | — | ASTM D570 |
| Thermal Conductivity | 0.32 | Z | W/(m·K) | — | — |
| CTE (X) | 19 | X | ppm/°C | — | — |
| CTE (Y) | 24 | Y | ppm/°C | — | — |
| CTE (Z) | 64 | Z | ppm/°C | — | — |
| Peel Strength (1 oz Cu) | 10 | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL94 |
Here are the details with specifications in the table below.
RF-35 High Frequency Materials
RF-35 is an advanced organic-ceramic laminate from Taconic's ORCER family, characterized by:
- Reinforcement: Woven glass for enhanced strength.
- Applications: Ideal for low-cost, high-volume commercial microwave and RF applications.
- Performance: Outstanding peel strength for 0.5oz and 1oz copper, crucial for rework scenarios.
- Thermal Properties: Glass transition temperature (Tg) exceeds 315 degrees Celsius.
- Moisture Resistance: Ultra-low moisture absorption and low dissipation factor minimize phase shift at high frequencies.
- Flammability: Rated V-0 and tested per IPC-TM 650 standards.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
