BICHENGPCBBicheng Technologies Limited

Rogers RO4725JXR 2-Layer 60.7mil High-Frequency Antenna PCB with Immersion Gold

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4725JXR Hydrocarbon / Ceramic / Woven Glass antenna grade laminates are a reliable, low-cost alternative to conventional PTFE-based laminates.

The resin systems of RO4725JXR dielectric materials provide the necessary properties for ideal antenna performance. RO4725JXR antenna grade laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These materials do not require the special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. RO4725JXR laminates are an affordable alternative to conventional PTFE-based antenna materials, allowing for designers to optimize cost and performance.

RO4725JXR laminates have the mechanical and electrical properties that antenna designers need. The laminates have a dielectric constant (Dk) of 2.55 and a loss tangent (Df) of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC Foil. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Materials are available with a demonstrated low PIM performance, with values better than -160 dBc (43dBm 1,900MHz signal).

Dielectric Constant of DK 2.55 +/-0.05 at 10GHz/23°C Dissipation Factor of 0.0026 at 10GHz/23°C and 0.0022 at 2.5GHz Excellent Thermal Coefficient of Dielectric Constant +34 ppm/°C CTE matched to copper with X axis of 13.9 ppm/°C, Y axis of 19 ppm/°C, Z axis of 25.6 ppm/°C High Tg value of >280 °C Perfect PIM value of -166 dBc

Low loss dielectric with low profile foil Low insertion loss Dk matched to standard PTFE based antenna offerings Reduced passive inter-modulation (PIM) Consistent circuit performance

Copper layer 1 – 35 µm Rogers RO4725JXR Core – 1.542 mm (60.7mil) Copper layer 2 – 35 µm

Components: 25 Total Pads: 150 Thru Hole Pads: 92 Top SMT Pads: 58 Bottom SMT Pads: 0 Vias: 131 Nets: 2

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RO4725JXR Antenna PCB

PCB specifications

Base MaterialRO4725JXR
Layer Count2-layer
Board Dimensions115.1mm × 66.3mm (±0.15mm)
Minimum Trace/Space5/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness1.62mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 µm
Surface FinishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com