BICHENGPCBBicheng Technologies Limited

AGC TLX-8 DK2.55 Df0.0018 (0.064-6.35mm) PTFE/Woven Fiberglass Laminate

Brief introduction

TLX-8 is a high-volume fiberglass-reinforced microwave substrate offering reliability in a wide range of RF applications. This versatile PTFE/fiberglass laminate features a dielectric constant range of 2.45-2.65 and is available in various thicknesses and copper claddings. It is suitable for low layer count microwave designs and serves as a workhorse in the RF microwave substrate world, particularly where mechanical reinforcement is required in severe environments.

Technical features & benefits

  1. 1.Excellent PIM Values in PCBs: Measured lower than -160 dBc, ensuring superior intermodulation performance.
  2. 2.Excellent Mechanical and Thermal Properties: Fiberglass reinforcement provides strength against vibration, high temperatures, and radiation.
  3. 3.Low and Stable Dielectric Constant: Dk = 2.55 ±0.04 at 10 GHz for consistent electrical performance.
  4. 4.Dimensionally Stable: Reliable fabrication and assembly with minimal movement.
  5. 5.Low Moisture Absorption: Maintains electrical properties in humid environments.
  6. 6.Tightly Controlled Dk (±0.04): Ensures repeatable circuit performance across panels and batches.
  7. 7.Low Dissipation Factor: Df of 0.0018 at 10 GHz, minimizing signal loss.
  8. 8.UL 94 V-0 Flammability Rating: Meets industry safety standards for flame resistance.
  9. 9.For Low Layer Count Microwave Designs: Ideal for cost-effective, high-performance RF circuits.
  10. 10.Long Space Heritage with NASA Low Outgassing Compliance: Suitable for aerospace and satellite applications.
  11. 11.~ ±2% Variation in Dk from -55°C to 125°C: Excellent thermal stability across wide temperature ranges.

Application areas

  • Antennas: Phased array, patch, and other high-frequency antenna designs.
  • Mixers, Splitters, Filters & Combiners: Passive RF components requiring low loss.
  • Passive Components: General-purpose RF circuits and devices.
  • Radar Systems: Automotive, defense, and weather radar applications.
  • Mobile Communications: Base stations and backhaul equipment.
  • Microwave Test Equipment: Calibration standards and test fixtures.
  • Microwave Transmission Devices: High-frequency signal distribution.
  • RF Components: General high-frequency circuit designs.
  • Applications Requiring Resistance to Severe Environments: Space launch vibration, high temperature exposure, radiation resistance, extreme maritime conditions, wide temperature ranges during flight.
AGC TLX-8 Laminate

Typical properties: TLX-8

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
TLX-8
PropertiesConditionsTypical ValueUnitTest Method
Electrical Properties
Dielectric Constant@ 10 GHz2.55 ± 0.04—IPC-650 2.5.5.3
Dissipation Factor@ 10 GHz0.0018—IPC-650 2.5.5.5.1
Outgassing% TML0.034 H 257 °F @ ≤ 5 x 10⁻⁵ TorrASTM E 595
—% CVCM0.00——
—% WVR0.01——
Surface Resistivity—6.605 x 10⁸MΩIPC-650 2.5.17.1 Sec. 5.2.1 (Elevated Temp.)
——3.550 x 10⁶MΩIPC-650 2.5.17.1 Sec. 5.2.1 (Humidity Cond.)
Volume Resistivity—1.110 x 10¹⁰MΩ·cmIPC-650 2.5.17.1 Sec. 5.2.1 (Elevated Temp.)
——1.046 x 10¹⁰MΩ·cmIPC-650 2.5.17.1 Sec. 5.2.1 (Humidity Cond.)
Dimensional StabilityMD0.06mm/m (mils/in)IPC-650 2.4.39 Sec. 5.4 (After Bake)
—CD0.08mm/m (mils/in)—
—MD0.09mm/m (mils/in)IPC-650 2.4.39 Sec. 5.5 (Thermal Stress)
—CD0.10mm/m (mils/in)—
Thermal Properties
Thermal Conductivity—0.19W/m·KASTM F433/ASTM 1530-06
CTE (25-260°C)X21ppm/°CIPC-650 2.4.41/ASTM D 3386
—Y23ppm/°C—
—Z215ppm/°C—
Td2% Weight Loss535°CIPC-650 2.4.24.6 (TGA)
—5% Weight Loss553°C—
Mechanical Properties
Peel Strength1 oz. ED2.63 (15)N/mm (lbs/in)IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress)
—1 oz. RTF2.98 (17)N/mm² (kpsi)—
—½ oz. ED2.45 (14)N/mm² (kpsi)IPC-650 2.4.8.3 (Elevated Temp.)
—½ oz. ED1.93 (11)N/mm² (kpsi)IPC-650 2.4.8 Sec. 5.2.2 (Thermal Stress)
—1 oz. rolled2.28 (13)N/mm² (kpsi)—
Young's ModulusMD6,757 (980)N/mm² (psi)ASTM D 902
—CD8,274 (1,200)N/mm² (psi)—
—MD11,238 (1,630)N/mm² (psi)ASTM D 3039
Chemical/Physical Properties
Moisture Absorption—0.02%IPC-650 2.6.2.1
Dielectric Breakdown—> 45kVIPC-650 2.5.6
Flammability Rating—V-0—UL-94

Available configurations

  • Dielectric Thickness Range: 0.0025" - 0.250" (0.064 mm - 6.35 mm); can be manufactured in increments of 0.005" (0.125 mm).
  • Standard Panel Size: 18" x 24" (457 mm x 610 mm).
  • Available Sheet Sizes: 12" x 18" (305 x 457 mm), 16" x 18" (406 x 457 mm), 18" x 24" (457 x 610 mm), 16" x 36" (406 x 914 mm), 24" x 36" (610 x 914 mm), 18" x 48" (457 x 1,220 mm), 36" x 48" (914 x 1,220 mm).
  • Copper Cladding: Various options available including ED, RTF, and rolled copper foils.
  • Custom Configurations: Contact AGC for availability of additional thicknesses, other sizes, and other types of cladding.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com