Taconic TLX-6 DK 2.65 Df0.0016/0.0022 (0.089-6.35mm) Copper Clad Laminate
Brief introduction
TLX-6 raises the dielectric constant to 2.65 with Df 0.0016–0.0022, giving designers a slightly more compact RF substrate than TLX-0. Thicknesses from 0.089mm to 6.35mm support antennas, couplers, and microwave test hardware that need stable Dk and good dimensional strength.
Technical features & benefits
- 1.Excellent PIM Values in PCBs: Measured lower than -160 dBc, ensuring superior intermodulation performance.
- 2.Excellent Mechanical & Thermal Properties: Fiberglass reinforcement provides strength against vibration, high temperatures, and radiation.
- 3.Low and Stable Dielectric Constant (Dk): Dk = 2.65 ±0.04 at 10 GHz for consistent electrical performance.
- 4.Dimensionally Stable: Reliable fabrication and assembly with minimal movement.
- 5.Low Moisture Absorption: 0.02% moisture absorption maintains electrical properties in humid environments.
- 6.Tightly Controlled DK: Ensures repeatable circuit performance across panels and batches.
- 7.Low Dissipation Factor (Df): Df of 0.0016 @ 1.9GHz and 0.0022 @ 10GHz for minimal signal loss.
- 8.UL 94 V-0 Flammability Rating: Meets industry safety standards for flame resistance.
- 9.Suitable for Low Layer Count Microwave Designs: Ideal for cost-effective, high-performance RF circuits.
Application areas
- Antennas: Phased array, patch, and other high-frequency antenna designs.
- Mixers, Splitters, Filters & Combiners: Passive RF components requiring low loss.
- Passive Components: General-purpose RF circuits and devices.
- Radar Systems: Automotive, defense, and weather radar applications.
- Mobile Communication Infrastructure: Base stations and backhaul equipment.
- Microwave Test Equipment: Calibration standards and test fixtures.
- Aerospace & Satellite Systems: Due to low outgassing and radiation resistance.
- High-Vibration Environments: Space launch, engine modules, and military platforms.
- Extreme Environment Applications: Warship antennas, altimeters, and industrial sensors.
Typical properties: TLX-6
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Property | Test Method | Units | Value |
|---|---|---|---|
| Dielectric Constant & Loss | |||
| Dk @ 10 GHz | IPC-650 2.5.5.3 | — | 2.65 |
| Df @ 1.9 GHz | IPC-650 2.5.5.5.1 | — | 0.0016 |
| Df @ 10 GHz | IPC-650 2.5.5.5.1 | — | 0.0022 |
| Outgassing (per ASTM E 595) | |||
| % TML (24 Hr @ 257°F) | ASTM E 595 | % | 0.09 |
| % CVCM (24 Hr @ 257°F) | ASTM E 595 | % | <0.01 |
| % WVR (24 Hr @ 257°F) | ASTM E 595 | % | 0.06 |
| Key Mechanical/Thermal | |||
| Moisture Absorption | IPC-650 2.6.2.1 | % | 0.02 |
| Flammability Rating | UL 94 | — | V-0 |
| Decomposition Temp. Td (5%) | IPC-650 2.4.24.6 (TGA) | °C | 553 |
| CTE (Z-axis, 25-260°C) | IPC-650 2.4.41 / ASTM D3386 | ppm/°C | 215 |
| Dimensional Stability (MD, After Bake) | IPC-650 2.4.39 Sec. 5.4 | mm/M | 0.06 |
Available configurations
- Designation: TLX-6 with Dk = 2.65 ± 0.04.
- Dielectric Thickness Range: 0.0035 - 0.250 in (0.089 - 6.35 mm).
- Copper Claddings: Can be combined with any of AGC's available copper claddings.
- Surface Optimization: Substrate surface is optimized for superior copper adhesion.
- Example Part Number: TLX-9-0310-CH/CH - 18" x 24" (457 mm x 610 mm).
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
