BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 5880LZ DK2.00 PTFE Laminates 0.25mm - 1.27mm High Frequency Low Loss PCB Material

Brief introduction

RT/duroid 5880LZ is a filled PTFE composite laminate engineered for demanding stripline and microstrip circuit applications in high-frequency electronics. It provides a low-density, lightweight solution suitable for performance-critical and weight-sensitive designs, such as aerospace and advanced communication systems.

Technical features & benefits

  1. 1.Low and Stable Dielectric Constant: The dielectric constant (εr) remains consistently low at 2.00 across panels and over a wide frequency range, ensuring reliable signal integrity in RF and microwave circuits.
  2. 2.Low Dissipation Factor: With a typical loss tangent of 0.0021, the material supports low-loss performance up to Ku-band and beyond, ideal for high-frequency printed circuit boards.
  3. 3.Excellent Thermal and Dimensional Stability: Low thermal coefficient of εr (+20 ppm/°C) and minimal dimensional change (-0.38%) ensure reliable operation under varying environmental conditions.
  4. 4.Superior Electrical Properties: High volume and surface resistivity, along with strong dielectric strength (40 kV), provide robust insulation and performance in multilayer PCB designs.

Application areas

  • Aerospace & Defense: Ideal for satellite communication systems, radar components, and phased-array antennas where low density and consistent electrical performance are critical.
  • Microwave & RF Circuits: Excellent for microstrip, stripline, and millimeter-wave applications up to Ku-band and beyond, enabling high signal fidelity.
  • Automotive Radar: Suited for 77 GHz automotive radar sensors and advanced driver-assistance systems (ADAS) requiring low loss and stable dielectric constant.
  • Wireless Infrastructure: Perfect for 5G base stations, backhaul antennas, and high-frequency filters that demand minimal signal attenuation.
Rogers RT/duroid 5880LZ Laminate

Typical properties: RT/duroid 5880LZ

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
RT/duroid 5880LZ
PropertyTypical Value [1]DirectionUnitsConditionTest Method
Dielectric Constant, εr (Process)2.00 ± 0.04Z—10 GHz / 23°CIPC-TM-650, 2.5.5.5
Dielectric Constant, εr (Design)2.00Z—8 GHz - 40 GHzDifferential Phase Length
Dissipation Factor, tan δTyp: 0.0021 Max: 0.0027Z—10 GHz / 23°CIPC-TM-650, 2.5.5.5
Thermal Coefficient of εr+20Zppm/°C-50°C to 150°C, 10 GHzIPC-TM-650, 2.5.5.5
Volume Resistivity1.74 × 10⁷—MΩ·cmC-96/35/90IPC-TM-650, 2.5.17.1
Surface Resistivity2.08 × 10⁶—MΩC-96/35/90IPC-TM-650, 2.5.17.1
Electrical Strength40—kVD48/50IPC-TM-650, 2.5.6
Dimensional Stability-0.38X,Y%—IPC-TM-650, 2.4.39A
Moisture Absorption0.31—%24 hr / 23°CIPC-TM-650, 2.6.2.1
Thermal Conductivity0.33ZW/m·K80°CASTM C518
Coefficient of Thermal Expansion54, 47 (X,Y) 40 (Z)X,Y / Zppm/°C0 to 150°CIPC-TM-650, 2.4.41
Outgassing - TML0.01—%—ASTM E-595
Outgassing - CVCM0.01—%—ASTM E-595
Outgassing - WVR0.01—%—ASTM E-595
Density1.4—g/cm³—ASTM D792
Copper Peel Strength>4.0—pli—IPC-TM-650, 2.4.8
Flammability RatingV-0———UL 94
Lead-Free Process CompatibleYES————

Available configurations

Standard thicknessesStandard panel sizesStandard claddings
0.005"0.127 mm ±0.001"
12" × 18"305 × 457 mm
1/2 oz ED copper17 µm
0.010"0.254 mm ±0.001"
24" × 18"610 × 457 mm
1 oz ED copper35 µm
0.020"0.508 mm ±0.001"
—
Other foil optionsAvailable on request
0.0315"0.800 mm ±0.001"
——
0.060"1.524 mm ±0.001"
——

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com