BICHENGPCBBicheng Technologies Limited

Wangling F4BTMS233 DK2.33 Df0.0010 (0.09mm-) Copper Clad Laminate

Brief introduction

F4BTMS233 is an upgraded material in the F4BTMS series, representing a technological breakthrough in formulation and manufacturing. It incorporates a significant amount of ceramic filler and is reinforced with ultra-thin, superfine fiberglass cloth. This aerospace-grade, high-reliability material offers superior performance with a broader dielectric constant range and can serve as a domestic replacement for similar international products.

Technical features & benefits

  1. 1.Small dielectric constant tolerance with excellent batch-to-batch consistency.
  2. 2.Ultra-low dielectric loss.
  3. 3.Stable dielectric constant and low loss values up to 40 GHz, suitable for phase-sensitive applications.
  4. 4.Excellent temperature coefficients for Dk and Df, maintaining stable frequency and phase performance from -55°C to 150°C.
  5. 5.Superior radiation resistance, retaining stable electrical and physical properties after irradiation.
  6. 6.Low outgassing performance, meeting aerospace vacuum outgassing requirements.
  7. 7.Low CTE in X, Y, and Z directions, ensuring dimensional thermal stability and hole copper reliability.
  8. 8.Improved thermal conductivity for higher power applications.
  9. 9.Excellent dimensional stability.
  10. 10.Low water absorption.

Application areas

  • Aerospace and aviation equipment, space and cabin systems.
  • Microwave and RF applications.
  • Radar and military radar systems.
  • Feed networks.
  • Phase-sensitive antennas, phased array antennas.
  • Satellite communication.
  • Standard Panel Sizes (Custom sizes available upon request): 305×460mm | 460×610mm | 610×920mm
  • Standard Copper Foil: Type: Standard RTF low-profile copper foil.
  • Available Thickness: 0.5OZ (0.018mm), 1OZ (0.035mm). Options: Can be paired with 50Ω embedded resistive foil, aluminum base, or copper base.
  • Thickness Availability: F4BTMS233 can be supplied with a minimum core thickness of 0.09mm. Available in multiples of 0.09mm or 0.127mm.
  • Metal Clad Variants (F4BTMS233-AL/CU): This model is available as metal-clad laminates with aluminum or copper bases for enhanced shielding or heat dissipation.
Wangling F4BTMS233 Laminate

Typical properties: F4BTMS 233

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
F4BTMS 233
PropertyTest ConditionUnitF4BTMS233
Dielectric Constant (Typ.)10GHz–2.33
Dielectric Constant Tolerance––±0.03
Dielectric Constant (Design)10GHz–2.33
Dissipation Factor (Typ.)10GHz–0.0010
—20GHz–0.0011
—40GHz–0.0015
Dielectric Constant Temp. Coeff.-55℃~150℃ppm/℃-122
Peel Strength1 OZ RTF FoilN/mm>2.4
Volume ResistivityNormalMΩ·cm≥1×10⁸
Surface ResistanceNormalMΩ≥1×10⁸
Electric Strength (Z)5KW, 500V/sKV/mm>30
Breakdown Voltage (XY)5KW, 500V/sKV>38
CTE (X, Y)-55℃~288℃ppm/℃35~40
CTE (Z)-55℃~288℃ppm/℃220
Thermal Stress260℃, 10s, 3 cycles–No delamination
Water Absorption20±2℃, 24h%0.02
DensityRoom Temperatureg/cm³2.22
Long-term Operating Temp.–℃-55~+260
Thermal Conductivity (Z)Z-directionW/(m·K)0.28
Flammability–UL-94V-0
Material Composition––PTFE, Ultra-thin Superfine (Quartz) Fiberglass, Ceramic

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com