BICHENGPCBBicheng Technologies Limited

Wangling F4BME245 DK2.45 Df0.0012 (0.1-12.0mm) RTF Copper Clad Laminate

Brief introduction

Wangling F4BME series are PTFE glass fabric copper-clad laminates that share the same dielectric layer as the F4BM series but utilize Reverse Treated Foil (RTF) copper. This configuration delivers excellent Passive Intermodulation (PIM) performance, more precise circuit control, and lower conductor loss, making it ideal for applications with stringent PIM requirements. F4BME245 is the variant with a dielectric constant of 2.45.

Technical features & benefits

  1. 1.Selectable Dielectric Constant (Dk) from 2.17 to 3.0; customizable Dk available.
  2. 2.Low dissipation factor (low loss).
  3. 3.Excellent PIM performance (≤ -159 dBc) due to Reverse Treated Foil (RTF) copper.
  4. 4.More precise line control and lower conductor loss.
  5. 5.Good dimensional stability and enhanced size control.
  6. 6.Radiation resistance and low outgassing.
  7. 7.Commercial, high-volume, cost-effective production.
  8. 8.UL 94 V-0 flammability rating.

Application areas

  • Microwave, RF, Radar
  • Phase Shifters, Passive Components
  • Power Dividers, Couplers, Combiners
  • Feed Networks, Phased Array Antennas
  • Satellite Communication, Base Station Antennas
  • Applications requiring excellent PIM performance.
Wangling F4BME245 Laminate

Typical properties: F4BME 245

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
F4BME 245
PropertiesTest ConditionsUnitF4BME245
Electrical Properties
Dielectric Constant (Typical)10 GHz-2.45
Dielectric Constant Tolerance/-±0.05
Dissipation Factor (Typical)10 GHz-0.0012
—20 GHz-0.0017
Temperature Coefficient of Dk-55°C to 150°Cppm/°C-120
Peel Strength1 oz. F4BMEN/mm>1.6
Volume ResistivityNormal ConditionMΩ·cm≥6×10⁶
Surface ResistanceNormal ConditionMΩ≥1×10⁶
Dielectric Strength (Z-direction)5 kW, 500 V/skV/mm>25
Breakdown Voltage (XY-direction)5 kW, 500 V/skV>32
PIM PerformanceOnly for F4BME seriesdBc≤ -159
Thermal & Mechanical Properties
CTEXY-direction, -55°C to 288°Cppm/°C20~25
—Z-direction, -55°C to 288°Cppm/°C187
Thermal Stress260°C, 10s, 3 cycles-No Delamination
Water Absorption20±2°C, 24 hours%≤0.08
DensityRoom Temperatureg/cm³2.22
Long-term Operating TemperatureHigh/Low Temp Chamber°C-55 to +260
Thermal ConductivityZ-directionW/(m·K)0.30
Flammability Rating/UL-94V-0
Material Composition//PTFE, Glass Fiber Cloth; F4BME uses Reverse Treated Foil (RTF) copper.

Available configurations

  • Copper Foil Options for F4BME: Reverse Treated Foil (RTF) Copper. Available thicknesses: 0.5 oz (0.018mm), 1 oz (0.035mm).
  • Standard Panel Sizes Available: 460 × 610 mm, 500 × 600 mm, 850 × 1200 mm, 914 × 1220 mm, 1000 × 1200 mm
  • Available Thicknesses & Tolerances (Conventional): Thickness (mm): 0.1 (core), 0.127 (core), 0.2, 0.25, 0.5, 0.508, 0.762, 0.8, 1.0, 1.5, 1.524, 1.575, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0. Corresponding tolerances range from ±0.01mm to ±0.20mm. Note: For Dk ≤ 2.65, minimum core thickness is 0.1mm. For Dk 2.7–3.0, minimum core thickness is 0.2mm.
  • F4BME Series with Metal Core (Aluminum/Copper Base): Models: F4BME*-AL (Aluminum base), F4BME*-CU (Copper base). Serves for shielding or heat dissipation. Example: F4BME245-CU represents F4BME245 with a copper base. Standard sizes available: 460×610 mm, 460×305 mm. Other sizes upon request.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com