BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 5870 DK2.33 Df0.0012 (0.127-1.575mm) Copper Clad Laminate

Brief introduction

RT/duroid 5870 is a glass microfiber reinforced PTFE composite designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity, which is consistent from panel to panel and over a wide frequency range. Its low dissipation factor extends its usefulness to Ku-band and beyond. The material is easily machined and resistant to common PCB processing chemicals.

Technical features & benefits

  1. 1.Exceptional dielectric constant uniformity due to randomly oriented glass microfibers.
  2. 2.Stable dielectric constant (Dk) over a wide frequency range and from panel to panel.
  3. 3.Very low dissipation factor, enabling high-frequency performance up to Ku-band and above.
  4. 4.Easy to cut, shear, and machine.
  5. 5.Resistant to solvents and reagents used in standard PCB fabrication.
  6. 6.Compatible with lead-free processing.

Application areas

  • Stripline and microstrip circuits.
  • High-frequency and RF components for communication systems.
  • Applications requiring stable electrical performance up to Ku-band and beyond.
Rogers RT/duroid 5870 Laminate

Typical properties: RT/duroid 5870

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
RT/duroid 5870
PropertyDirectionUnitsCondition / Test MethodRT/duroid 5870
Dielectric Constant, εr ProcessZ–10 GHz, IPC-TM-650 2.5.5.52.33 ± 0.02
Dielectric Constant, εr DesignZ–8 GHz - 40 GHz, Differential Phase Length2.33
Dissipation Factor, tan δZ–10 GHz, IPC-TM-650 2.5.5.50.0012
Thermal Coefficient of εrZppm/°C-50 - 150°C, IPC-TM-650 2.5.5.5-115
Volume ResistivityZMohm·cmC96/35/90, ASTM D2572 X 10⁷
Surface ResistivityZMohmC/96/35/90, ASTM D2572 X 10⁷
Moisture AbsorptionN/A%0.062" (1.6mm) D48/50, ASTM D5700.02
Thermal ConductivityZW/m·K80°C, ASTM C5180.22
Coefficient of Thermal ExpansionXppm/°C0-100°C, IPC-TM-650 2.4.4122
—Yppm/°C0-100°C, IPC-TM-650 2.4.4128
—Zppm/°C0-100°C, IPC-TM-650 2.4.41173
DensityN/Agm/cm³N/A, ASTM D7922.2
Copper Peel StrengthN/Apli (N/mm)1 oz (35mm) EDC foil after solder float, IPC-TM-650 2.4.827.2 (4.8)
FlammabilityN/AUL-94N/AV-0
Lead-Free Process CompatibleN/A–N/AYes

Available configurations

  • Standard Panel Sizes: 18" X 12" (457 X 305mm), 18" X 24" (457 X 610mm). Additional panel sizes available.
  • Standard Claddings: Electrodeposited Copper Foil: ½ oz. (18µm), 1 oz. (35µm). Rolled Copper Foil: ½ oz. (18µm), 1 oz. (35µm). Additional claddings (heavy metal, resistive foil, unclad, aluminum, copper, or brass plate) are available upon request.
  • Standard Thicknesses (Typical): 0.005" (0.127mm) ±0.0005", 0.010" (0.252mm) ±0.0007", 0.020" (0.508mm) ±0.0015", 0.031" (0.787mm) ±0.0020", 0.062" (1.575mm) ±0.0030". Additional thicknesses available from 0.0035" to 0.375".

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com