Wangling TF600 2-Layer 0.7mm ENIG PCB for 5G Antenna & Radar Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TF600 is a thermosetting high-frequency laminate composed of modified PTFE resin and micron-sized ceramic fillers, featuring excellent microwave performance and temperature resistance, balancing ultra-low dielectric loss, stable DK consistency and FR4-compatible processing (drilling, plating, lamination). It supports 260℃ lead-free assembly. With excellent thermal stability and moisture resistance, it's ideal for high-reliability RF/microwave designs where low insertion loss and signal integrity are critical. It contains no glass fiber cloth.
This 2-layer rigid PCB is constructed entirely with TF600 as the core material, providing exceptional signal integrity, low insertion loss, and thermal stability for demanding RF, microwave, and 5G/6G applications.
Dielectric Constant (DK): 6.0 ± 0.15 at 10GHz (core for high-frequency impedance matching)
Dissipation Factor (Df): 0.0025 at 10GHz (ultra-low loss for signal integrity)
Thermal resistance: T260 >60 minutes, T288 >20 minutes (lead-free assembly compliant)
Peel strength (Min.): 0.80 N/mm (≈9.2 lbs/inch) for 1OZ ED Copper
CTE: X=14-16 ppm/℃, Y=12-14 ppm/℃, Z=40-45 ppm/℃ (dimensional stability)
Moisture Absorption (Max.): 0.06% (low water uptake for reliability)
High CAF resistance and chemical corrosion resistance
Thermal Conductivity: 0.60 W/m·K (efficient heat dissipation)
Ultra-low dielectric loss for excellent signal integrity
Stable DK consistency across frequency and temperature
FR4-compatible processing (drilling, plating, lamination)
Excellent thermal stability and moisture resistance
No glass fiber cloth – homogeneous dielectric properties
Efficient heat dissipation for high-power applications
Copper_layer_1 – 35 μm TF600 – 0.635 mm (25 mil) Copper_layer_2 – 35 μm
Components: 43 Total Pads: 61 Thru Hole Pads: 32 Top SMT Pads: 29 Bottom SMT Pads: 0 Vias: 34 Nets: 2
Radar Systems (Automotive ADAS, Aerospace)
Test & Measurement Equipment (Vector Network Analyzers)
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
9.TF600 Ceramic-Filled PTFE High-Frequency Laminate – Product Introduction
This product is composed of PTFE resin material with excellent microwave performance and temperature resistance, compounded with ceramics. The material contains no glass fiber cloth. The dielectric constant is precisely adjusted by controlling the ratio between ceramic and PTFE resin. The production process is special, resulting in excellent dielectric properties and high reliability.
TF refers to unclad smooth surface material, TF-1 refers to single-sided copper clad material, and TF-2 refers to double-sided copper clad material.
Dielectric constant range from 3 to 16 with stable performance. Common dielectric constants include 3.0, 6.0, 9.2, 9.6, 10.2, 16. Low dielectric loss.
Suitable for microwave and millimeter wave printed circuit board fabrication.
Long-term operating temperature is higher than TP materials, can be used long-term in the range of -80℃ to +200℃.
Thickness available from 0.635mm to 2.5mm.
Easy to process using standard thermoplastic material processing methods.
13.Standard Thicknesses, Panel Sizes & Claddings
Application areas
- Dissipation Factor (Df): 0.0025 at 10GHz (ultra-low loss for signal integrity)
- Tg: >280℃ (DSC, high thermal stability)
- Peel strength (Min.): 0.80 N/mm (≈9.2 lbs/inch) for 1OZ ED Copper
- CTE: X=14-16 ppm/℃, Y=12-14 ppm/℃, Z=40-45 ppm/℃ (dimensional stability)
- Moisture Absorption (Max.): 0.06% (low water uptake for reliability)
- UL 94-V0 flammability rating
- High CAF resistance and chemical corrosion resistance
- Thermal Conductivity: 0.60 W/m·K (efficient heat dissipation)
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
