TSM-DS3 2-Layer 0.8mm PCB – Low-Loss Ceramic-Filled 30mil Core with Immersion Gold Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TSM-DS3 is a ceramic-filled reinforced material with very low fiberglass content (~5%) that rivals epoxies in fabricating large-format complex multilayers. It is a thermally stable, industry-leading low-loss core (Df = 0.0011 at 10 GHz) that can be manufactured with the predictability and consistency of the best fiberglass-reinforced epoxies. TSM-DS3 was developed for high-power applications (TC = 0.65 W/m·K) where it is necessary for the dielectric material to conduct heat away from other heat sources in a PWB design. It also features very low coefficients of thermal expansion for demanding thermal cycling environments.
Dielectric constant of 3.0 with tight tolerance ±0.05 at 10 GHz/23°C Dissipation factor of 0.0014 at 10GHz High thermal conductivity (unclad): 0.65 W/m·K Low moisture absorption: 0.07% Matched to copper CTE: X-axis 10 ppm/°C, Y-axis 16 ppm/°C, Z-axis 23 ppm/°C
Low fiberglass content (~5%) Dimensional stability rivals epoxy Enables large-format, high-layer-count PCBs Supports complex PCB builds with high yield, consistency, and predictability Temperature-stable Dk (±0.25% from -30°C to 120°C) Compatible with resistive foils
5. PCB Stackup (2-Layer Rigid Structure)
Copper_layer_1 - 35 μm TSM-DS3 - 0.762 mm (30 mil) Copper_layer_2 - 35 μm
Components: 42Total Pads: 114Thru Hole Pads: 78Top SMT Pads: 36Bottom SMT Pads: 0Vias: 51Nets: 2
CouplersPhased array antennasRadar manifoldsmmWave antenna/automotive systemsOil drilling equipmentSemiconductor/ATE testing
Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
